RE: [CAD_CAM_EDM_DRO] Measurements to compare machines
on 2014-07-08 14:00:29 UTC
You are thinking of rotation around the pin. I agree with the key or with our angle adjuster that is not an issue. What I am referring to is the heads ability to move/flex in along the Y axis from the pins elasticity. This is with the stock Sherline pin on a stock Sherline.
Not saying it is the biggest issue, just that I feel it is a weak design and adds additional flex on top of the column flex.
Tim G
A2Z Corp
Discussion Thread
2014-06-25 11:47:21 UTC
Measurements to compare machines
Andy Wander
2014-06-25 12:07:36 UTC
RE: [CAD_CAM_EDM_DRO] Measurements to compare machines
2014-06-25 12:33:18 UTC
RE: [CAD_CAM_EDM_DRO] Measurements to compare machines
2014-06-26 10:41:55 UTC
RE: [CAD_CAM_EDM_DRO] Measurements to compare machines
Michael Fagan
2014-06-26 15:26:45 UTC
Re: [CAD_CAM_EDM_DRO] Measurements to compare machines
2014-07-08 14:00:29 UTC
RE: [CAD_CAM_EDM_DRO] Measurements to compare machines
2014-07-08 14:12:23 UTC
Re: [CAD_CAM_EDM_DRO] Measurements to compare machines
2014-07-09 10:07:47 UTC
RE: [CAD_CAM_EDM_DRO] Measurements to compare machines
David G. LeVine
2014-07-09 17:16:16 UTC
Re: [CAD_CAM_EDM_DRO] Measurements to compare machines
Jon Elson
2014-07-10 09:57:08 UTC
Re: [CAD_CAM_EDM_DRO] Measurements to compare machines
ED MAISEY
2014-07-10 09:57:37 UTC
Re: [CAD_CAM_EDM_DRO] Measurements to compare machines
William Thomas
2014-07-10 13:01:18 UTC
FOAM-- [CAD_CAM_EDM_DRO] Measurements to compare machines
Gary Click
2014-07-10 20:49:29 UTC
Re: FOAM-- [CAD_CAM_EDM_DRO] Measurements to compare machines
CS Mo
2014-10-15 10:21:09 UTC
Air Powered Spindle
Hannu Venermo
2014-10-15 10:35:12 UTC
Re: [CAD_CAM_EDM_DRO] Air Powered Spindle
Rjreese29
2014-10-15 12:53:33 UTC
Re: [CAD_CAM_EDM_DRO] Air Powered Spindle
Joe Hovel
2014-10-16 08:22:09 UTC
Re: Air Powered Spindle
brock_bencomo@y...
2014-10-16 08:23:03 UTC
Re: [CAD_CAM_EDM_DRO] Air Powered Spindle
CS Mo
2014-10-16 09:01:49 UTC
Re: [CAD_CAM_EDM_DRO] Air Powered Spindle
Denis Knobloch
2014-10-16 10:36:32 UTC
Re: [CAD_CAM_EDM_DRO] Air Powered Spindle
Malcolm Parker-Lisberg
2014-10-28 04:27:34 UTC
Re: [CAD_CAM_EDM_DRO] Air Powered Spindle