CAD CAM EDM DRO - Yahoo Group Archive

Re: RE: lost steps

Posted by ballendo@y...
on 2000-08-28 19:41:28 UTC
Jerry,

First be SURE your system is working reliably with the new/other
software.

Don't forget DeskncRT! D/l the demo, it uses the EMC core and runs in
DOS. Works with encoders and camtronics dro card. The user interface
is nearly impossible to use for anything real at the moment, but I'm
sure Carl is working on it.

Anyway, it might be a second step since it's EMC in a DOS wrapper.

Hope this helps.

Ballendo

Discussion Thread

ballendo@y... 2000-08-21 16:46:48 UTC Re: lost steps Ozzie@h... 2000-08-21 20:22:01 UTC Re: lost steps Ray 2000-08-22 07:43:56 UTC Re: lost steps beer@s... 2000-08-22 13:18:49 UTC Re: lost steps ballendo@y... 2000-08-22 22:07:44 UTC Re:Re: lost steps ballendo@y... 2000-08-28 19:41:28 UTC Re: RE: lost steps cdoughtynz <cdoughty@p... 2003-01-10 09:18:26 UTC lost steps Tim Goldstein 2003-01-10 09:59:24 UTC RE: [CAD_CAM_EDM_DRO] lost steps Jon Elson 2003-01-10 10:07:02 UTC Re: [CAD_CAM_EDM_DRO] lost steps j.guenther 2003-01-10 10:26:32 UTC RE: [CAD_CAM_EDM_DRO] lost steps cdoughtynz <cdoughty@p... 2003-01-10 11:24:11 UTC Re: lost steps Mariss Freimanis <mariss92705@y... 2003-01-10 12:52:40 UTC Re: lost steps martin55662002 <armartin@t... 2003-01-10 13:07:26 UTC Re: lost steps Jon Elson 2003-01-10 22:36:02 UTC Re: [CAD_CAM_EDM_DRO] Re: lost steps cdoughtynz <cdoughty@p... 2003-01-16 19:59:45 UTC Re: lost steps Mariss Freimanis <mariss92705@y... 2003-01-16 22:46:05 UTC Re: lost steps JanRwl@A... 2003-01-17 08:36:13 UTC Re: [CAD_CAM_EDM_DRO] Re: lost steps cdoughtynz <cdoughty@p... 2003-01-20 01:51:12 UTC Re: lost steps Jon Elson 2003-01-21 23:10:47 UTC Re: [CAD_CAM_EDM_DRO] Re: lost steps