Re: [CAD_CAM_EDM_DRO] Single phase mains
Posted by
Jerry Kimberlin
on 2000-09-23 09:56:09 UTC
Bill Darby wrote:
230v single phase input, 3-P output is $400.
Check Automation Direct (under drives) to see characteristics.
There are other suppliers as well.
http://store.automationdirect.com/cgi-bin/ncommerce3/ExecMacro/plcdirect/homeframe.d2w/report
JerryK
> These single to three phase variable frequency control units do not seem to be available in the five horse varietyHitachi make them - 1/2 to 10 hp, 230v or 460v input. A 5 hp
230v single phase input, 3-P output is $400.
Check Automation Direct (under drives) to see characteristics.
There are other suppliers as well.
http://store.automationdirect.com/cgi-bin/ncommerce3/ExecMacro/plcdirect/homeframe.d2w/report
JerryK
Discussion Thread
Bill Darby
2000-09-23 09:45:19 UTC
Single phase mains
Jerry Kimberlin
2000-09-23 09:56:09 UTC
Re: [CAD_CAM_EDM_DRO] Single phase mains
Bill Darby
2000-09-23 10:37:39 UTC
Re: [CAD_CAM_EDM_DRO] Single phase mains
Jerry Kimberlin
2000-09-23 18:00:10 UTC
Re: [CAD_CAM_EDM_DRO] Single phase mains
Darrell
2000-09-23 18:38:40 UTC
Re: [CAD_CAM_EDM_DRO] Single phase mains
Jon Elson
2000-09-23 22:18:10 UTC
Re: [CAD_CAM_EDM_DRO] Single phase mains
Bill Darby
2000-09-24 05:48:27 UTC
Re: [CAD_CAM_EDM_DRO] Single phase mains
machines@n...
2000-09-24 07:54:33 UTC
Re: Single phase mains
dougrasmussen@c...
2000-09-24 18:02:21 UTC
Re: Single phase mains
Bill Darby
2000-09-28 05:36:48 UTC
Re: [CAD_CAM_EDM_DRO] Single phase mains
machines@n...
2000-09-28 05:48:29 UTC
Re: Single phase mains
Jerry Kimberlin
2000-09-28 08:35:08 UTC
Re: [CAD_CAM_EDM_DRO] Single phase mains
paul@a...
2000-09-28 09:05:59 UTC
Re: [CAD_CAM_EDM_DRO] Single phase mains
Jon Elson
2000-09-28 20:06:49 UTC
Re: [CAD_CAM_EDM_DRO] Single phase mains