Re: G-Codes to Stepper Pulses?

I would d/l a copy of stepster from www.metalworking.com look in the
shareware section for the source code. Its free.
A few members of this group are working to debug it. It is free try.
http://www.thegallos.com/stepster.htm
Dan
-----Original Message-----
From: Kirk W. Fraser <kirk@...>
To: CAD_CAM_EDM_DRO@onelist.com <CAD_CAM_EDM_DRO@onelist.com>
Date: Wednesday, June 30, 1999 2:56 PM
Subject: [CAD_CAM_EDM_DRO] G-Codes to Stepper Pulses?

>From: "Kirk W. Fraser" <kirk@...>
>
>I'm thinking of hooking up a Smithy Granite for CNC using stepper
>motors. I have a book that shows how to drive the stepper from a PC but
>I don't know how to convert the G-Code output of various packages like
>BobCad or FlashCut into stepper pulse commands. I am a programmer so I
>should be able to do it myself with a detailed definition of G-Codes and
>maybe a few tips. Where can I find an unabridged G-Code definition?
>
>Any other advice? I would like the cheapest most accurate system
>possible, capable of working small stainless parts to 0.001" or better.
>
>Thanks,
>Kirk Fraser
>
>
>--------------------------- ONElist Sponsor ----------------------------
>
>Looking for a new hobby? Want to make a new friend?
>http://www.onelist.com
>Come join one of 180,000 e-mail communities at ONElist!
>
>------------------------------------------------------------------------
>Welcome to CAD_CAM_EDM_DRO@...,an unmodulated list for the

discussion of shop built systems in the above catagories.

>To Unsubscribe, read archives, change to or from digest.
>Go to: http://www.onelist.com/isregistered.cgi
>Log on, and you will go to Member Center, and you can make changes there.
>bill,
>List Manager
>