Re: stepper motors
Posted by
Dan Mauch
on 1999-07-01 06:57:01 UTC
AC synchronous motors can be made into DC stepper motors but the problem is
that they are very high inductance thus it is difficult to get good speed
out of the motors. Additionally, some of these motors don't lend themselves
to be easily rewired internally. Stick with regular stepper motors.
Dan
-----Original Message-----
From: TADGUNINC@... <TADGUNINC@...>
To: CAD_CAM_EDM_DRO@onelist.com <CAD_CAM_EDM_DRO@onelist.com>
Date: Wednesday, June 30, 1999 9:35 PM
Subject: Re: [CAD_CAM_EDM_DRO] stepper motors
that they are very high inductance thus it is difficult to get good speed
out of the motors. Additionally, some of these motors don't lend themselves
to be easily rewired internally. Stick with regular stepper motors.
Dan
-----Original Message-----
From: TADGUNINC@... <TADGUNINC@...>
To: CAD_CAM_EDM_DRO@onelist.com <CAD_CAM_EDM_DRO@onelist.com>
Date: Wednesday, June 30, 1999 9:35 PM
Subject: Re: [CAD_CAM_EDM_DRO] stepper motors
>From: TADGUNINC@...is
>
>Hopefully you guys are still on......what is the difference synchronous ac
>motor, advertisement says it can be used as a dc stepper, and a stepper
>motor? Also I haven't heard anyone say anything about step accuracy, what
>acceptable?discussion of shop built systems in the above catagories.
>Thanks Tracey
>
>--------------------------- ONElist Sponsor ----------------------------
>
>With more than 20 million e-mails exchanged daily...
>http://www.onelist.com
>...ONElist is home to the liveliest discussions on the Internet!
>
>------------------------------------------------------------------------
>Welcome to CAD_CAM_EDM_DRO@...,an unmodulated list for the
>To Unsubscribe, read archives, change to or from digest.
>Go to: http://www.onelist.com/isregistered.cgi
>Log on, and you will go to Member Center, and you can make changes there.
>bill,
>List Manager
>
Discussion Thread
TADGUNINC@x...
1999-06-30 21:33:35 UTC
Re: stepper motors
TADGUNINC@x...
1999-06-30 21:37:59 UTC
Re: stepper motors
Jon Elson
1999-06-30 23:38:36 UTC
Re: stepper motors
Jon Elson
1999-06-30 23:41:15 UTC
Re: stepper motors
Dan Mauch
1999-07-01 06:57:01 UTC
Re: stepper motors
John Grant
1999-07-01 08:53:30 UTC
Re: stepper motors
Ted
1999-07-01 08:10:46 UTC
Re: stepper motors
Bob Bachman
1999-07-01 11:21:39 UTC
Re: stepper motors
Robert N Ash
1999-07-01 09:20:08 UTC
Re: stepper motors
TADGUNINC@x...
1999-07-01 08:42:37 UTC
Re: stepper motors
TADGUNINC@x...
1999-07-01 08:44:35 UTC
Re: stepper motors
John Grant
1999-07-01 09:50:46 UTC
Re: stepper motors
John Grant
1999-07-01 10:11:25 UTC
Re: stepper motors
John Grant
1999-07-01 10:17:02 UTC
Re: stepper motors
bobd@m...
1999-07-02 02:33:22 UTC
Re: stepper motors
Dan Mauch
1999-07-02 06:20:05 UTC
Re: stepper motors
John Grant
1999-07-02 08:38:01 UTC
Re: stepper motors
bobd@m...
1999-07-03 06:19:53 UTC
Re: stepper motors
John Grant
1999-07-03 10:05:00 UTC
Re: stepper motors
Eugene McCully
2001-11-20 23:02:08 UTC
stepper motors
shymu@b...
2001-11-21 04:38:13 UTC
Re: stepper motors
Robert Campbell
2004-02-08 16:14:04 UTC
stepper motors
Bob McKnight
2004-02-08 16:15:54 UTC
Re: [CAD_CAM_EDM_DRO] stepper motors
Donald K. Duncan
2004-02-08 17:09:46 UTC
Re: [CAD_CAM_EDM_DRO] stepper motors
Bob McKnight
2004-02-08 17:24:36 UTC
Re: [CAD_CAM_EDM_DRO] stepper motors