CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: 2D printer-real parts

Posted by Joe Vicars
on 2000-10-11 11:38:04 UTC
Anyone remotely interested in Photo Etching must check out Randy's Website. I am really impressed!!
Looks like a project to contemplate.
How much is one of those 2500DPI laser printers??????

Randy Gordon-Gilmore wrote:

> At 10:03 AM 10/11/00 -0500, Joe Vicars wrote:
>
> >Start with laminated sheets of almost any metal and then the burn
> >away the laminate with a 2d printer. Then drop the metal in acid and
> >you've got parts. Tiny and intricately detailed up to about .050"
> >thick.
>
> Chemical machining is a technique which involves almost as much thought and
> care as physical machining. :-) I've done some work with home etching, and
> have a couple of articles on my website (address in sig below.)
>
> I'm eager to be able to do 3D surface machining as an adjunct to the etched
> parts. Thus far, I've done 2D profiling (both by manual
> dial-in-the-numbers and by machining profile cutters) but it does limit the
> complexity of shapes I can model...
>
> Best regards,
>
> Randy
>
> Randy Gordon-Gilmore ,----.___________ ______________ _________________
> ProtoTrains // = = === == || == == == = || == == == = == =|
> Rio Vista, CA, USA /-O==O------------o==o------------o==o-----------o==o-'
> zephyrus@... http://www.rickadee.net/~zephyrus
>
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@egroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@egroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@egroups.com
> List owner: CAD_CAM_EDM_DRO-owner@egroups.com, wanliker@...
> Moderator: jmelson@... [Moderator]
> URL to this page: http://www.egroups.com/group/CAD_CAM_EDM_DRO
> FAQ: http://www.ktmarketing.com/faq.html
> bill,
> List Manager

Discussion Thread

Joe Vicars 2000-10-11 07:49:10 UTC 2D printer-real parts Ian Wright 2000-10-11 09:18:13 UTC Re: [CAD_CAM_EDM_DRO] 2D printer-real parts dave engvall 2000-10-11 09:57:40 UTC Re: [CAD_CAM_EDM_DRO] 2D printer-real parts Randy Gordon-Gilmore 2000-10-11 10:00:07 UTC Re: 2D printer-real parts Alan Marconett KM6VV 2000-10-11 10:47:19 UTC Re: [CAD_CAM_EDM_DRO] 2D printer-real parts Randy Gordon-Gilmore 2000-10-11 11:08:11 UTC Re: 2D printer-real parts Joe Vicars 2000-10-11 11:38:04 UTC Re: [CAD_CAM_EDM_DRO] Re: 2D printer-real parts Jon Elson 2000-10-11 14:43:28 UTC Re: 2D printer-real parts Anne Ogborn 2000-10-11 14:49:28 UTC Re: [CAD_CAM_EDM_DRO] 2D printer-real parts Anne Ogborn 2000-10-11 15:04:56 UTC Re: [CAD_CAM_EDM_DRO] Re: 2D printer-real parts Randy Gordon-Gilmore 2000-10-11 17:37:55 UTC What about QNX? Alison & Jim Gregg 2000-10-11 19:06:22 UTC Re: [CAD_CAM_EDM_DRO] 2D printer-real parts Randy Gordon-Gilmore 2000-10-11 20:46:39 UTC Re: 2D printer-real parts ballendo@y... 2000-10-11 23:52:16 UTC re:What about QNX? Jon Elson 2000-10-11 23:56:35 UTC Re: [CAD_CAM_EDM_DRO] 2D printer-real parts ballendo@y... 2000-10-12 00:21:33 UTC re:Re: 2D printer-real parts Alison & Jim Gregg 2000-10-12 01:33:48 UTC Re: [CAD_CAM_EDM_DRO] re:Re: 2D printer-real parts Ian Wright 2000-10-12 01:34:44 UTC Re: [CAD_CAM_EDM_DRO] Re: 2D printer-real parts Kevin P. Martin 2000-10-12 08:10:04 UTC RE: [CAD_CAM_EDM_DRO] What about QNX? Drew Rogge 2000-10-12 15:18:26 UTC Re: [CAD_CAM_EDM_DRO] Re: 2D printer-real parts Art Fenerty 2000-10-12 15:20:53 UTC Re: [CAD_CAM_EDM_DRO] Re: 2D printer-real parts JanRwl@A... 2000-10-13 18:55:32 UTC Re: [CAD_CAM_EDM_DRO] Re: 2D printer-real parts