Re: [CAD_CAM_EDM_DRO] Re: 2D printer-real parts

Hi guys:
How about a quick survey. How many pulses per inch and how many inches
per second do you commonly use?

Art

----- Original Message -----
From: "Drew Rogge" <drew@...>
To: <CAD_CAM_EDM_DRO@egroups.com>
Sent: Thursday, October 12, 2000 3:18 PM
Subject: Re: [CAD_CAM_EDM_DRO] Re: 2D printer-real parts


> In following some links regarding the 3d printing stuff the other day
> I came across the website of ExtrudeHone. I had heard about the process
> of honing the things with abrasives mixed in a slurry before but they
> also have a couple of products/processes which I found pretty interesting;
> untrasonic and electrolytic machining. The electrolytic stuff sounded
> pretty neat. ExtrudeHone's website is at:
>
> http://www.extrudehone.com/
>
> Click on the ECX item to get to the electrolytic machining page.
>
> Drew
>
> On Oct 11, 9:59am, Randy Gordon-Gilmore wrote:
> > Subject: [CAD_CAM_EDM_DRO] Re: 2D printer-real parts
> > At 10:03 AM 10/11/00 -0500, Joe Vicars wrote:
> >
> > >Start with laminated sheets of almost any metal and then the burn
> > >away the laminate with a 2d printer. Then drop the metal in acid and
> > >you've got parts. Tiny and intricately detailed up to about .050"
> > >thick.
> >
> > Chemical machining is a technique which involves almost as much thought
and
> > care as physical machining. :-) I've done some work with home etching,
and
> > have a couple of articles on my website (address in sig below.)
> >
> > I'm eager to be able to do 3D surface machining as an adjunct to the
etched
> > parts. Thus far, I've done 2D profiling (both by manual
> > dial-in-the-numbers and by machining profile cutters) but it does limit
the
> > complexity of shapes I can model...
> >
> > Best regards,
> >
> > Randy
> >
> > Randy Gordon-Gilmore ,----.___________ ______________
_________________
> > ProtoTrains // = = === == || == == == = || == == == = ==
=|
> > Rio Vista, CA, USA
/-O==O------------o==o------------o==o-----------o==o-'
> > zephyrus@...
http://www.rickadee.net/~zephyrus
> >
> >-- End of excerpt from Randy Gordon-Gilmore
>
>
>
> --
> Drew Rogge
> drew@...
>
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@egroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@egroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@egroups.com
> List owner: CAD_CAM_EDM_DRO-owner@egroups.com, wanliker@...
> Moderator: jmelson@... [Moderator]
> URL to this page: http://www.egroups.com/group/CAD_CAM_EDM_DRO
> FAQ: http://www.ktmarketing.com/faq.html
> bill,
> List Manager
>