2D printer-real parts
Posted by
Joe Vicars
on 2000-10-11 07:49:10 UTC
I am fascinated by Photo Chemical Machining, and the possibility of
doing this at home somehow converting an inkjet.
Start with laminated sheets of almost any metal and then the burn
away the laminate with a 2d printer. Then drop the metal in acid and
you've got parts. Tiny and intricately detailed up to about .050"
thick.
You could make wheels or strips for quadrature encoders ALL day
long. You could also make PCB which I know has been discussed before.
Check it out!
http://www.mansfieldgraphics.com/
doing this at home somehow converting an inkjet.
Start with laminated sheets of almost any metal and then the burn
away the laminate with a 2d printer. Then drop the metal in acid and
you've got parts. Tiny and intricately detailed up to about .050"
thick.
You could make wheels or strips for quadrature encoders ALL day
long. You could also make PCB which I know has been discussed before.
Check it out!
http://www.mansfieldgraphics.com/
Discussion Thread
Joe Vicars
2000-10-11 07:49:10 UTC
2D printer-real parts
Ian Wright
2000-10-11 09:18:13 UTC
Re: [CAD_CAM_EDM_DRO] 2D printer-real parts
dave engvall
2000-10-11 09:57:40 UTC
Re: [CAD_CAM_EDM_DRO] 2D printer-real parts
Randy Gordon-Gilmore
2000-10-11 10:00:07 UTC
Re: 2D printer-real parts
Alan Marconett KM6VV
2000-10-11 10:47:19 UTC
Re: [CAD_CAM_EDM_DRO] 2D printer-real parts
Randy Gordon-Gilmore
2000-10-11 11:08:11 UTC
Re: 2D printer-real parts
Joe Vicars
2000-10-11 11:38:04 UTC
Re: [CAD_CAM_EDM_DRO] Re: 2D printer-real parts
Jon Elson
2000-10-11 14:43:28 UTC
Re: 2D printer-real parts
Anne Ogborn
2000-10-11 14:49:28 UTC
Re: [CAD_CAM_EDM_DRO] 2D printer-real parts
Anne Ogborn
2000-10-11 15:04:56 UTC
Re: [CAD_CAM_EDM_DRO] Re: 2D printer-real parts
Randy Gordon-Gilmore
2000-10-11 17:37:55 UTC
What about QNX?
Alison & Jim Gregg
2000-10-11 19:06:22 UTC
Re: [CAD_CAM_EDM_DRO] 2D printer-real parts
Randy Gordon-Gilmore
2000-10-11 20:46:39 UTC
Re: 2D printer-real parts
ballendo@y...
2000-10-11 23:52:16 UTC
re:What about QNX?
Jon Elson
2000-10-11 23:56:35 UTC
Re: [CAD_CAM_EDM_DRO] 2D printer-real parts
ballendo@y...
2000-10-12 00:21:33 UTC
re:Re: 2D printer-real parts
Alison & Jim Gregg
2000-10-12 01:33:48 UTC
Re: [CAD_CAM_EDM_DRO] re:Re: 2D printer-real parts
Ian Wright
2000-10-12 01:34:44 UTC
Re: [CAD_CAM_EDM_DRO] Re: 2D printer-real parts
Kevin P. Martin
2000-10-12 08:10:04 UTC
RE: [CAD_CAM_EDM_DRO] What about QNX?
Drew Rogge
2000-10-12 15:18:26 UTC
Re: [CAD_CAM_EDM_DRO] Re: 2D printer-real parts
Art Fenerty
2000-10-12 15:20:53 UTC
Re: [CAD_CAM_EDM_DRO] Re: 2D printer-real parts
JanRwl@A...
2000-10-13 18:55:32 UTC
Re: [CAD_CAM_EDM_DRO] Re: 2D printer-real parts