Re: [CAD_CAM_EDM_DRO] Re: EDM machine
Posted by
wanliker@a...
on 2000-10-31 16:45:43 UTC
In a message dated 10/31/00 3:47:39 PM Mountain Standard Time,
jmelson@... writes:
<<
Sheesh! I'm using between 30 and 40 V with caps ranging
from 1.5 uF to 20 uF. I get the best results around 3 - 6 uF,
although progress is slow. >>
If you go to your friendly photo developer and ask for the disposable cameras
that are brought in for developing, you will find a small capacitor that is
apparently made photo flash work, i.e., fast discharge. The one in my hand
now took about one minute to open, pry at the film opening. There is in this
one a 330 volt 120 MFD Photoflash capacitor. Price is right.
bill
jmelson@... writes:
<<
Sheesh! I'm using between 30 and 40 V with caps ranging
from 1.5 uF to 20 uF. I get the best results around 3 - 6 uF,
although progress is slow. >>
If you go to your friendly photo developer and ask for the disposable cameras
that are brought in for developing, you will find a small capacitor that is
apparently made photo flash work, i.e., fast discharge. The one in my hand
now took about one minute to open, pry at the film opening. There is in this
one a 330 volt 120 MFD Photoflash capacitor. Price is right.
bill
Discussion Thread
F. de Beer
1999-07-27 07:20:09 UTC
EDM machine
David Howland
1999-07-27 14:38:26 UTC
RE: EDM machine
F. de Beer
1999-07-28 02:19:44 UTC
Re: EDM machine
WBHINKLE@x...
1999-07-28 08:12:31 UTC
Re: EDM machine
PTENGIN@x...
1999-07-28 10:44:28 UTC
Re: EDM machine
Brian Fairey
1999-07-28 11:23:58 UTC
Re: EDM machine
Pete Jarman
1999-07-29 03:52:15 UTC
Re: EDM machine
ptengin@a...
2000-10-31 01:41:38 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM machine
wanliker@a...
2000-10-31 04:20:55 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM machine
dave engvall
2000-10-31 08:04:18 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM machine
marble here
2000-10-31 13:14:28 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM machine
Jon Elson
2000-10-31 14:46:19 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM machine
wanliker@a...
2000-10-31 16:45:43 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM machine
dave engvall
2000-10-31 16:54:23 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM machine
Carey L. Culpepper
2000-10-31 17:39:33 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM machine
ptengin@a...
2000-11-01 00:24:12 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM machine
Ian Wright
2000-11-01 05:17:06 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM machine
Jon Elson
2000-11-01 15:49:16 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM machine
Jon Elson
2000-11-01 15:57:10 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM machine
marble here
2000-11-01 16:19:28 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM machine
Alan Marconett KM6VV
2000-11-01 16:48:54 UTC
Re: EDM machine
ptengin@a...
2000-11-01 17:10:01 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM machine
dave engvall
2000-11-01 17:24:58 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM machine
cnc4me@u...
2000-11-01 18:19:48 UTC
Re: EDM machine
wanliker@a...
2000-11-01 18:29:06 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM machine
marble here
2000-11-01 18:46:33 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM machine
dave engvall
2000-11-01 20:14:44 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM machine
Tim Goldstein
2000-11-01 21:14:47 UTC
RE: [CAD_CAM_EDM_DRO] Re: EDM machine
Jon Elson
2000-11-01 22:06:33 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM machine
Ian Wright
2000-11-02 06:45:50 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM machine
marble here
2000-11-02 14:14:13 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM machine
Jon Elson
2000-11-02 14:20:07 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM machine
cnc4me@u...
2000-11-02 14:33:14 UTC
Re: EDM machine
Jon Elson
2000-11-02 14:41:26 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM machine
marble here
2000-11-02 15:11:15 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM machine
Jon Elson
2000-11-02 16:09:21 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM machine