CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: EDM machine

Posted by Jon Elson
on 2000-11-01 22:06:33 UTC
wanliker@... wrote:

> In a message dated 11/1/00 5:10:42 PM Mountain Standard Time,
> jmelson@... writes:
>
> << I can't imagine what 120 uF at 300 V will do! Most likely a huge
> expolsion, >>
> 1. That is only the voltage rating, it does not have to be charged
> that high.
> 2. A bit of resistance in the line will control the current.

But, then it takes longer for the larger cap to discharge through the
resistor.

> Could easily be
> a coil of wire to use the Inductive Reactance.

That is turning it into a constant current source.

> 3. Hook them in series and the capacitance reduces, check the
> formulas.

Why use many large-value caps when one small one will do?

> The point I was trying to make is that there are cheap, as in free,
> capacitors that are made for high discharge currents.

Yes, and I have a fair number of them already.

Jon

Discussion Thread

F. de Beer 1999-07-27 07:20:09 UTC EDM machine David Howland 1999-07-27 14:38:26 UTC RE: EDM machine F. de Beer 1999-07-28 02:19:44 UTC Re: EDM machine WBHINKLE@x... 1999-07-28 08:12:31 UTC Re: EDM machine PTENGIN@x... 1999-07-28 10:44:28 UTC Re: EDM machine Brian Fairey 1999-07-28 11:23:58 UTC Re: EDM machine Pete Jarman 1999-07-29 03:52:15 UTC Re: EDM machine ptengin@a... 2000-10-31 01:41:38 UTC Re: [CAD_CAM_EDM_DRO] Re: EDM machine wanliker@a... 2000-10-31 04:20:55 UTC Re: [CAD_CAM_EDM_DRO] Re: EDM machine dave engvall 2000-10-31 08:04:18 UTC Re: [CAD_CAM_EDM_DRO] Re: EDM machine marble here 2000-10-31 13:14:28 UTC Re: [CAD_CAM_EDM_DRO] Re: EDM machine Jon Elson 2000-10-31 14:46:19 UTC Re: [CAD_CAM_EDM_DRO] Re: EDM machine wanliker@a... 2000-10-31 16:45:43 UTC Re: [CAD_CAM_EDM_DRO] Re: EDM machine dave engvall 2000-10-31 16:54:23 UTC Re: [CAD_CAM_EDM_DRO] Re: EDM machine Carey L. Culpepper 2000-10-31 17:39:33 UTC Re: [CAD_CAM_EDM_DRO] Re: EDM machine ptengin@a... 2000-11-01 00:24:12 UTC Re: [CAD_CAM_EDM_DRO] Re: EDM machine Ian Wright 2000-11-01 05:17:06 UTC Re: [CAD_CAM_EDM_DRO] Re: EDM machine Jon Elson 2000-11-01 15:49:16 UTC Re: [CAD_CAM_EDM_DRO] Re: EDM machine Jon Elson 2000-11-01 15:57:10 UTC Re: [CAD_CAM_EDM_DRO] Re: EDM machine marble here 2000-11-01 16:19:28 UTC Re: [CAD_CAM_EDM_DRO] Re: EDM machine Alan Marconett KM6VV 2000-11-01 16:48:54 UTC Re: EDM machine ptengin@a... 2000-11-01 17:10:01 UTC Re: [CAD_CAM_EDM_DRO] Re: EDM machine dave engvall 2000-11-01 17:24:58 UTC Re: [CAD_CAM_EDM_DRO] Re: EDM machine cnc4me@u... 2000-11-01 18:19:48 UTC Re: EDM machine wanliker@a... 2000-11-01 18:29:06 UTC Re: [CAD_CAM_EDM_DRO] Re: EDM machine marble here 2000-11-01 18:46:33 UTC Re: [CAD_CAM_EDM_DRO] Re: EDM machine dave engvall 2000-11-01 20:14:44 UTC Re: [CAD_CAM_EDM_DRO] Re: EDM machine Tim Goldstein 2000-11-01 21:14:47 UTC RE: [CAD_CAM_EDM_DRO] Re: EDM machine Jon Elson 2000-11-01 22:06:33 UTC Re: [CAD_CAM_EDM_DRO] Re: EDM machine Ian Wright 2000-11-02 06:45:50 UTC Re: [CAD_CAM_EDM_DRO] Re: EDM machine marble here 2000-11-02 14:14:13 UTC Re: [CAD_CAM_EDM_DRO] Re: EDM machine Jon Elson 2000-11-02 14:20:07 UTC Re: [CAD_CAM_EDM_DRO] Re: EDM machine cnc4me@u... 2000-11-02 14:33:14 UTC Re: EDM machine Jon Elson 2000-11-02 14:41:26 UTC Re: [CAD_CAM_EDM_DRO] Re: EDM machine marble here 2000-11-02 15:11:15 UTC Re: [CAD_CAM_EDM_DRO] Re: EDM machine Jon Elson 2000-11-02 16:09:21 UTC Re: [CAD_CAM_EDM_DRO] Re: EDM machine