Re: [CAD_CAM_EDM_DRO] Re: EDM machine
Posted by
Jon Elson
on 2000-11-02 14:41:26 UTC
marble here wrote:
120 times per second. Now, the technique I use has a large
(30,000 uF) capacitor after the rectifier which provides a smooth
DC voltage to start with. The series resistor provides the charging
of the capacitor. Here, the frequency is dependent more on the
EDM process than anything else, but the charging time can be
varied with the resistor value (as well as the combination of
EDM capacitors in the circuit).
Jon
> My understanding on the use of Caps. I could and mayIf you use a full-wave rectifier, the caps will be charged at
> be wrong on this ., If you use a supply of 60htz that
> will be the max that the caps will hold right
120 times per second. Now, the technique I use has a large
(30,000 uF) capacitor after the rectifier which provides a smooth
DC voltage to start with. The series resistor provides the charging
of the capacitor. Here, the frequency is dependent more on the
EDM process than anything else, but the charging time can be
varied with the resistor value (as well as the combination of
EDM capacitors in the circuit).
Jon
Discussion Thread
F. de Beer
1999-07-27 07:20:09 UTC
EDM machine
David Howland
1999-07-27 14:38:26 UTC
RE: EDM machine
F. de Beer
1999-07-28 02:19:44 UTC
Re: EDM machine
WBHINKLE@x...
1999-07-28 08:12:31 UTC
Re: EDM machine
PTENGIN@x...
1999-07-28 10:44:28 UTC
Re: EDM machine
Brian Fairey
1999-07-28 11:23:58 UTC
Re: EDM machine
Pete Jarman
1999-07-29 03:52:15 UTC
Re: EDM machine
ptengin@a...
2000-10-31 01:41:38 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM machine
wanliker@a...
2000-10-31 04:20:55 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM machine
dave engvall
2000-10-31 08:04:18 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM machine
marble here
2000-10-31 13:14:28 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM machine
Jon Elson
2000-10-31 14:46:19 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM machine
wanliker@a...
2000-10-31 16:45:43 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM machine
dave engvall
2000-10-31 16:54:23 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM machine
Carey L. Culpepper
2000-10-31 17:39:33 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM machine
ptengin@a...
2000-11-01 00:24:12 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM machine
Ian Wright
2000-11-01 05:17:06 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM machine
Jon Elson
2000-11-01 15:49:16 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM machine
Jon Elson
2000-11-01 15:57:10 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM machine
marble here
2000-11-01 16:19:28 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM machine
Alan Marconett KM6VV
2000-11-01 16:48:54 UTC
Re: EDM machine
ptengin@a...
2000-11-01 17:10:01 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM machine
dave engvall
2000-11-01 17:24:58 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM machine
cnc4me@u...
2000-11-01 18:19:48 UTC
Re: EDM machine
wanliker@a...
2000-11-01 18:29:06 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM machine
marble here
2000-11-01 18:46:33 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM machine
dave engvall
2000-11-01 20:14:44 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM machine
Tim Goldstein
2000-11-01 21:14:47 UTC
RE: [CAD_CAM_EDM_DRO] Re: EDM machine
Jon Elson
2000-11-01 22:06:33 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM machine
Ian Wright
2000-11-02 06:45:50 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM machine
marble here
2000-11-02 14:14:13 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM machine
Jon Elson
2000-11-02 14:20:07 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM machine
cnc4me@u...
2000-11-02 14:33:14 UTC
Re: EDM machine
Jon Elson
2000-11-02 14:41:26 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM machine
marble here
2000-11-02 15:11:15 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM machine
Jon Elson
2000-11-02 16:09:21 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM machine