Re: [CAD_CAM_EDM_DRO] Old DOS boot disk for W95?

There's your problem right there! A machine using Win 95 will not boot from
a boot disk made from DOS 6.22

You might get it to work if you install DOS 6.22 as an upgrade to the Win 95
system first. I'd try that before wiping the drive.

Wiping the drive and installing DOS 6.22 in it's own folder before
installing Win95 might solve your problems too.

Gordon

-----Original Message-----
From: Jon Anderson <janders@...>
To: CAD_CAM_EDM_DRO@egroups.com <CAD_CAM_EDM_DRO@egroups.com>
Date: Saturday, December 02, 2000 12:46 AM
Subject: Re: [CAD_CAM_EDM_DRO] Old DOS boot disk for W95?

>Gordan,
>
>The boot disk was made from DOS 6.22, and I'm trying to get a machine
>with W95 installed to boot from this floppy, and still recognize the HD.
>Really just need to test my setup with another computer for debugging
>purposes, but it wouldn't hurt to have a spare computer ready to go
>should my main computer ever crash.
>I'd just wipe the HD and start over, except that I have a couple CAM
>demo programs on it that I'm experimenting with.
>
>Jon
>
>Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the

discussion of shop built systems, for CAD, CAM, EDM, and DRO.

>
>Addresses:
>Post message: CAD_CAM_EDM_DRO@egroups.com
>Subscribe: CAD_CAM_EDM_DRO-subscribe@egroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@egroups.com
>List owner: CAD_CAM_EDM_DRO-owner@egroups.com, wanliker@...
>Moderator: jmelson@... [Moderator]
>URL to this page: http://www.egroups.com/group/CAD_CAM_EDM_DRO
>FAQ: http://www.ktmarketing.com/faq.html
>bill,
>List Manager
>
>
>