CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: spindle motors

Posted by Jon Elson
on 2000-12-13 12:04:30 UTC
Marcus & Eva wrote:

>
> I have done all sorts of abusive things to this spindle with never a burp!
> I have crashed, I have run unbalanced cutters at 7000 rpm (flycutters and
> stuff), I have taken heavy cuts, I have run at 8000 rpm from a cold start,
> and I have never, ever serviced the spindle.
>
> Maybe the sensitivity of these systems is overstated??
>
> >
> >They use super-exotic bearings, special lubricants, and active cooling
> >systems to keep the bearings from getting hot. And, they have to
> >replace the bearings fairly often, too. (Really often if coolant gets
> >into them.)

Well, this is from shops that run high speed for 8 hours a day or more.
If you use it like I use my machine, that would be more like every
25 years!

Jon

Discussion Thread

Carlos Guillermo 2000-12-11 14:24:58 UTC spindle motors Wally K 2000-12-11 14:38:25 UTC Re: spindle motors Hugh Prescott 2000-12-11 15:38:53 UTC Re: [CAD_CAM_EDM_DRO] Re: spindle motors Jon Elson 2000-12-11 16:39:35 UTC Re: [CAD_CAM_EDM_DRO] Re: spindle motors ballendo@y... 2000-12-11 17:09:32 UTC Re: spindle motors Carlos Guillermo 2000-12-11 19:41:52 UTC RE: [CAD_CAM_EDM_DRO] Re: spindle motors Doug Harrison 2000-12-11 19:54:47 UTC Re: [CAD_CAM_EDM_DRO] Re: spindle motors Carlos Guillermo 2000-12-11 20:02:44 UTC RE: [CAD_CAM_EDM_DRO] Re: spindle motors Wally K 2000-12-11 21:03:10 UTC Re: spindle motors Wally K 2000-12-11 21:10:24 UTC Re: spindle motors Tim Goldstein 2000-12-11 21:13:45 UTC RE: [CAD_CAM_EDM_DRO] Re: spindle motors ballendo@y... 2000-12-11 21:56:21 UTC Re: Re: spindle motors Jon Elson 2000-12-11 22:12:25 UTC Re: [CAD_CAM_EDM_DRO] Re: spindle motors ballendo@y... 2000-12-11 22:16:10 UTC re:Re: Re: spindle motors ballendo@y... 2000-12-11 22:30:43 UTC re:RE: Re: spindle motors Carlos Guillermo 2000-12-12 06:24:13 UTC RE: [CAD_CAM_EDM_DRO] Re: spindle motors Wally K 2000-12-12 10:59:01 UTC Re: spindle motors Smoke 2000-12-12 11:22:17 UTC Re: [CAD_CAM_EDM_DRO] Re: spindle motors Carlos Guillermo 2000-12-12 13:25:27 UTC RE: [CAD_CAM_EDM_DRO] Re: spindle motors Tim Goldstein 2000-12-12 14:54:25 UTC RE: [CAD_CAM_EDM_DRO] Re: spindle motors Doug Harrison 2000-12-12 16:12:44 UTC Re: [CAD_CAM_EDM_DRO] re:Re: Re: spindle motors ballendo@y... 2000-12-12 16:51:24 UTC re:rE:Re:RE: spindle motors Jon Elson 2000-12-12 22:34:02 UTC Re: [CAD_CAM_EDM_DRO] Re: spindle motors Marcus & Eva 2000-12-13 08:22:01 UTC Re: [CAD_CAM_EDM_DRO] Re: spindle motors Jon Elson 2000-12-13 12:04:30 UTC Re: [CAD_CAM_EDM_DRO] Re: spindle motors ballendo@y... 2000-12-13 16:28:39 UTC Re: Re: spindle motors Marcus & Eva 2000-12-14 08:39:29 UTC Re: [CAD_CAM_EDM_DRO] Re: spindle motors Jon Elson 2000-12-14 11:53:23 UTC Re: [CAD_CAM_EDM_DRO] Re: spindle motors Smoke 2000-12-14 12:32:43 UTC Re: [CAD_CAM_EDM_DRO] Re: spindle motors Marcus & Eva 2000-12-15 07:51:23 UTC Re: [CAD_CAM_EDM_DRO] Re: spindle motors