Re: Re: spindle motors
Posted by
ballendo@y...
on 2000-12-13 16:28:39 UTC
Marcus,
Yes, I would be interested in more details? I'm guessing 3 bearings
and some precision spacers inside... But if not, thassokay!
Ballendo
'*******************************************************************
Hi Guys:
My machine has a 10,000 rpm spindle.
It is dirt-simple: a couple of angular contact bearings, pressed into
an
aluminum housing.
There is probably a wave spring for preload. The bearings are sealed
and
run in grease (I think)
I can try to get the spec.
The key things are:
1) the spindle is short and light. (5" long and maybe 1.5" dia)
2) the spindle is balanced. <snip>
Yes, I would be interested in more details? I'm guessing 3 bearings
and some precision spacers inside... But if not, thassokay!
Ballendo
'*******************************************************************
Hi Guys:
My machine has a 10,000 rpm spindle.
It is dirt-simple: a couple of angular contact bearings, pressed into
an
aluminum housing.
There is probably a wave spring for preload. The bearings are sealed
and
run in grease (I think)
I can try to get the spec.
The key things are:
1) the spindle is short and light. (5" long and maybe 1.5" dia)
2) the spindle is balanced. <snip>
Discussion Thread
Carlos Guillermo
2000-12-11 14:24:58 UTC
spindle motors
Wally K
2000-12-11 14:38:25 UTC
Re: spindle motors
Hugh Prescott
2000-12-11 15:38:53 UTC
Re: [CAD_CAM_EDM_DRO] Re: spindle motors
Jon Elson
2000-12-11 16:39:35 UTC
Re: [CAD_CAM_EDM_DRO] Re: spindle motors
ballendo@y...
2000-12-11 17:09:32 UTC
Re: spindle motors
Carlos Guillermo
2000-12-11 19:41:52 UTC
RE: [CAD_CAM_EDM_DRO] Re: spindle motors
Doug Harrison
2000-12-11 19:54:47 UTC
Re: [CAD_CAM_EDM_DRO] Re: spindle motors
Carlos Guillermo
2000-12-11 20:02:44 UTC
RE: [CAD_CAM_EDM_DRO] Re: spindle motors
Wally K
2000-12-11 21:03:10 UTC
Re: spindle motors
Wally K
2000-12-11 21:10:24 UTC
Re: spindle motors
Tim Goldstein
2000-12-11 21:13:45 UTC
RE: [CAD_CAM_EDM_DRO] Re: spindle motors
ballendo@y...
2000-12-11 21:56:21 UTC
Re: Re: spindle motors
Jon Elson
2000-12-11 22:12:25 UTC
Re: [CAD_CAM_EDM_DRO] Re: spindle motors
ballendo@y...
2000-12-11 22:16:10 UTC
re:Re: Re: spindle motors
ballendo@y...
2000-12-11 22:30:43 UTC
re:RE: Re: spindle motors
Carlos Guillermo
2000-12-12 06:24:13 UTC
RE: [CAD_CAM_EDM_DRO] Re: spindle motors
Wally K
2000-12-12 10:59:01 UTC
Re: spindle motors
Smoke
2000-12-12 11:22:17 UTC
Re: [CAD_CAM_EDM_DRO] Re: spindle motors
Carlos Guillermo
2000-12-12 13:25:27 UTC
RE: [CAD_CAM_EDM_DRO] Re: spindle motors
Tim Goldstein
2000-12-12 14:54:25 UTC
RE: [CAD_CAM_EDM_DRO] Re: spindle motors
Doug Harrison
2000-12-12 16:12:44 UTC
Re: [CAD_CAM_EDM_DRO] re:Re: Re: spindle motors
ballendo@y...
2000-12-12 16:51:24 UTC
re:rE:Re:RE: spindle motors
Jon Elson
2000-12-12 22:34:02 UTC
Re: [CAD_CAM_EDM_DRO] Re: spindle motors
Marcus & Eva
2000-12-13 08:22:01 UTC
Re: [CAD_CAM_EDM_DRO] Re: spindle motors
Jon Elson
2000-12-13 12:04:30 UTC
Re: [CAD_CAM_EDM_DRO] Re: spindle motors
ballendo@y...
2000-12-13 16:28:39 UTC
Re: Re: spindle motors
Marcus & Eva
2000-12-14 08:39:29 UTC
Re: [CAD_CAM_EDM_DRO] Re: spindle motors
Jon Elson
2000-12-14 11:53:23 UTC
Re: [CAD_CAM_EDM_DRO] Re: spindle motors
Smoke
2000-12-14 12:32:43 UTC
Re: [CAD_CAM_EDM_DRO] Re: spindle motors
Marcus & Eva
2000-12-15 07:51:23 UTC
Re: [CAD_CAM_EDM_DRO] Re: spindle motors