CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] Homebrew DROs

Posted by Tim Goldstein
on 2001-02-10 14:47:44 UTC
As far as I know you have found what there is. For the PC there is the
Kulaga/Mauch design that uses a dedicated ISA card and there is also the
Lindsey (?) design that uses the parallel port. I don't know of any
published design on another platform. Should be reasonably easy to do on a
palm or a micro using one of the USDigital encoder chips. Best non-surplus
source for encoders I know of is USDigital at www.usdigital.com Don't know
if they have a UK agent.

Tim
[Denver, CO]

>
> Hi DROers :-)
>
> I wonder if anyone has a definitive link list of homebrew DROs
> either using
> PCs/Macs/Palm or microcontrollers. Also, a CHEAP UK source of encoders
> (about 4k steps/rev is about right for me, with 5V outputs).
>
> I have managed to find only 2 PC based DROs in my searches, I assume that
> there _must_ be more than this in the world =:-? Even the yahoo
> CAD_CAM_EDM_DRO groups links produced squat.
>
> I'm considering designing my own around an old Palm Pilot, but I
> assume that
> someone somewhere has already been there, printed the tee shirt
> and done it
> (I hope :-)
>
>
> TIA
>
> Neil
>
FAQ: http://www.ktmarketing.com/faq.html

Discussion Thread

Neil Gillies 2001-02-10 13:50:59 UTC Homebrew DROs Tim Goldstein 2001-02-10 14:47:44 UTC RE: [CAD_CAM_EDM_DRO] Homebrew DROs A. G. Eckstein 2001-02-10 15:09:29 UTC Re: [CAD_CAM_EDM_DRO] Homebrew DROs paul@r... 2001-02-11 02:24:25 UTC Re: Homebrew DROs A. G. Eckstein 2001-02-11 04:19:48 UTC Re: [CAD_CAM_EDM_DRO] Re: Homebrew DROs dave engvall 2001-02-11 09:03:47 UTC Re: [CAD_CAM_EDM_DRO] Re: Homebrew DROs Neil Gillies 2001-02-12 23:26:29 UTC Re: Homebrew DROs Tony Jeffree 2001-02-13 02:09:30 UTC Re: Homebrew DROs Neil Gillies 2001-02-14 12:33:15 UTC Re: Homebrew DROs Alan Marconett KM6VV 2001-02-14 12:59:23 UTC Re: Homebrew DROs Tony Jeffree 2001-02-14 14:20:17 UTC Re: Homebrew DROs Tom Eldredge 2001-02-16 03:32:16 UTC Re: [CAD_CAM_EDM_DRO] Re: Homebrew DROs Tim Goldstein 2001-02-16 05:17:37 UTC RE: [CAD_CAM_EDM_DRO] Re: Homebrew DROs Alan Marconett KM6VV 2001-02-16 11:18:36 UTC Re: Homebrew DROs