CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] High pressure water jet (Lasers)

Posted by dave engvall

on 2001-03-12 18:29:48 UTC

ethanol/dry ice will freeze however acetone/dry
ice works pretty well.

I took a quick look at specs on some laser diodes
and the lower limit for temp seemed to be -10 C ..

so chilled brine would almost do.

Lots of luck., these diodes seem awful easy to
fry.

Dave

Discussion Thread

e.heritage@b... 2001-03-11 08:51:53 UTC High pressure water jet (Lasers) Jon Elson 2001-03-11 22:09:51 UTC Re: [CAD_CAM_EDM_DRO] High pressure water jet (Lasers) Ray 2001-03-12 08:36:30 UTC Re: High pressure water jet (Lasers) e.heritage@b... 2001-03-12 16:21:57 UTC Re: [CAD_CAM_EDM_DRO] Re: High pressure water jet (Lasers) e.heritage@b... 2001-03-12 16:45:34 UTC Re: [CAD_CAM_EDM_DRO] High pressure water jet (Lasers) dave engvall 2001-03-12 18:29:48 UTC Re: [CAD_CAM_EDM_DRO] High pressure water jet (Lasers) Art Fenerty 2001-03-12 18:39:39 UTC Re: [CAD_CAM_EDM_DRO] High pressure water jet (Lasers) e.heritage@b... 2001-03-12 19:29:16 UTC Re: [CAD_CAM_EDM_DRO] High pressure water jet (Lasers) JanRwl@A... 2001-03-12 20:39:14 UTC Re: [CAD_CAM_EDM_DRO] High pressure water jet (Lasers) Jon Elson 2001-03-12 22:13:55 UTC Re: [CAD_CAM_EDM_DRO] High pressure water jet (Lasers) dave engvall 2001-03-12 22:14:25 UTC Re: [CAD_CAM_EDM_DRO] High pressure water jet (Lasers) Jon Elson 2001-03-12 22:19:01 UTC Re: [CAD_CAM_EDM_DRO] High pressure water jet (Lasers) dave engvall 2001-03-12 22:22:56 UTC Re: [CAD_CAM_EDM_DRO] High pressure water jet (Lasers) Tim Goldstein 2001-03-12 22:31:29 UTC RE: [CAD_CAM_EDM_DRO] High pressure water jet (Lasers) Jon Elson 2001-03-12 22:31:34 UTC Re: [CAD_CAM_EDM_DRO] High pressure water jet (Lasers) Smoke 2001-03-12 22:48:52 UTC Re: [CAD_CAM_EDM_DRO] High pressure water jet (Lasers) Art Fenerty 2001-03-13 07:26:38 UTC Re: [CAD_CAM_EDM_DRO] High pressure water jet (Lasers) Art Fenerty 2001-03-13 07:28:59 UTC Re: [CAD_CAM_EDM_DRO] High pressure water jet (Lasers) dave engvall 2001-03-13 09:51:15 UTC Re: [CAD_CAM_EDM_DRO] High pressure water jet (Lasers) e.heritage@b... 2001-03-13 17:58:18 UTC Re: [CAD_CAM_EDM_DRO] High pressure water jet (Lasers) Jon Elson 2001-03-13 21:46:43 UTC Re: [CAD_CAM_EDM_DRO] High pressure water jet (Lasers) Jon Elson 2001-03-13 21:55:12 UTC Re: [CAD_CAM_EDM_DRO] High pressure water jet (Lasers) Jon Elson 2001-03-13 22:07:28 UTC Re: [CAD_CAM_EDM_DRO] High pressure water jet (Lasers) MIADSGNS@a... 2001-03-14 01:10:52 UTC Re: [CAD_CAM_EDM_DRO] High pressure water jet (Lasers) dave engvall 2001-03-14 09:26:59 UTC Re: [CAD_CAM_EDM_DRO] High pressure water jet (Lasers)