Re: [CAD_CAM_EDM_DRO] High pressure water jet (Lasers)

The acetone/dry ice method is great for part of the tempering process when
finishing forged work.

Smoke

-----Original Message-----
From: dave engvall <dengvall@...>
To: CAD_CAM_EDM_DRO@yahoogroups.com <CAD_CAM_EDM_DRO@yahoogroups.com>
Date: Monday, March 12, 2001 7:29 PM
Subject: Re: [CAD_CAM_EDM_DRO] High pressure water jet (Lasers)

>ethanol/dry ice will freeze however acetone/dry
>ice works pretty well.
>
>I took a quick look at specs on some laser diodes
>and the lower limit for temp seemed to be -10 C ..
>
>so chilled brine would almost do.
>
>Lots of luck., these diodes seem awful easy to
>fry.
>
>Dave
>
>
>Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the

discussion of shop built systems, for CAD, CAM, EDM, and DRO.

>
>Addresses:
>Post message: CAD_CAM_EDM_DRO@yahoogroups.com
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
>Moderator: jmelson@... timg@... [Moderator]
>URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>bill,
>List Manager
>
>FAQ: http://www.ktmarketing.com/faq.html
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>