CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: deep pocket milling

on 2001-03-29 14:45:58 UTC
At 05:20 PM 3/29/01 -0000, you wrote:
>--- In CAD_CAM_EDM_DRO@e..., "Marcus & Eva" <implmex@a...> wrote:
>> Hi Vic:
>> Have you considered farming that pocket out to get wire EDM cut.
>> A 6 1/2" deep pocket with a 1/4" corner radius is going to be a
>pig's

>How do you wire a pocket?

It sounds more like he wants to cut a rectangular hole with radiused
corners right through the part, so wire-cut EDM would work. "Pocket"
is the wrong term, of course, and I don't see how you can cut a
10" x 4" hole in a 12" x 6" part and be left with the claimed 2"
border. ;-)

Best regards,
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Spehro Pefhany --"it's the network..." "The Journey is the reward"
speff@... Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog Info for designers: http://www.speff.com
Contributions invited->The AVR-gcc FAQ is at: http://www.bluecollarlinux.com
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

Discussion Thread

Victor Cantu Jr. 2001-03-24 10:24:02 UTC deep pocket milling Jon Anderson 2001-03-24 11:12:31 UTC Re: [CAD_CAM_EDM_DRO] deep pocket milling Rich D. 2001-03-24 13:01:54 UTC Re: [CAD_CAM_EDM_DRO] deep pocket milling Jon Elson 2001-03-24 20:28:38 UTC Re: [CAD_CAM_EDM_DRO] deep pocket milling Victor Cantu Jr. 2001-03-29 01:40:54 UTC deep pocket milling Marcus & Eva 2001-03-29 08:33:18 UTC Re: [CAD_CAM_EDM_DRO] deep pocket milling John Stevenson 2001-03-29 09:21:31 UTC Re: deep pocket milling Tony Jeffree 2001-03-29 14:15:52 UTC Re: [CAD_CAM_EDM_DRO] deep pocket milling John Stevenson 2001-03-29 14:31:12 UTC Re: deep pocket milling Spehro Pefhany 2001-03-29 14:45:58 UTC Re: [CAD_CAM_EDM_DRO] Re: deep pocket milling Marcus 2001-03-29 15:59:17 UTC Re: [CAD_CAM_EDM_DRO] Re: deep pocket milling Tony Jeffree 2001-03-29 22:26:14 UTC Re: [CAD_CAM_EDM_DRO] deep pocket milling Bill Darby 2001-03-30 04:22:47 UTC Re: [CAD_CAM_EDM_DRO] Re: deep pocket milling marble here 2001-03-30 05:54:07 UTC Re: [CAD_CAM_EDM_DRO] Re: deep pocket milling Marcus & Eva 2001-03-30 07:42:26 UTC Re: [CAD_CAM_EDM_DRO] Re: deep pocket milling Bill Darby 2001-04-01 11:12:34 UTC Re: [CAD_CAM_EDM_DRO] Re: deep pocket milling