CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Chinese Lathes.

Posted by Art Fenerty
on 2001-04-22 06:55:39 UTC
Sven:

Thanks for the excellent site. Lots of good lathe beginner information. I
agree with your comments and think that you can always modify a lathe to be
what you want. The lathe I purchased did not have a threading dial, so I
already designed an electronic version of a threading dial, but to my
surprise when I opened the crate, the lathe I recieved had a threading dial.
I'll probably modify where I can, and accept what I can't.
Has anyone seen a 5" 4-jaw chuck that bolts on a permanent spindle
backplate with 3 screws. I think it's common on many chinese lathes. The
chuck is indented in the rear to auto center when bolting on. I could, of
course, use the 3-jaw to turn out an indentation in a 5" 4-jaw plain mount
chuck if I can't find the real one.

Art
----- Original Message -----
From: "Sven Peter, TAD S.A." <peteryco@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Sunday, April 22, 2001 7:12 AM
Subject: Re: [CAD_CAM_EDM_DRO] Re: Chinese Lathes.


> Hello Art,
> Look at www.lathes.co.uk it is a marvalous site
> and there are links with perfect descriptions for
> turning, tune up and bedway scraping. Because
> You will have only the longitudinal bedways hardened.
> Wooddragon from the dreammachine g roop uses
> the machines as assembly kit.. That means he takes
> everything apart what he sees in bad shape he works
> it over and *voula* a nice piece of machine.
> "A friend had still casting sand in the bed way"
> Enjoy your new machine
> Sven Peter
>
> Art Fenerty wrote:
>
> > Now I
> > just have to learn how to use it properly and get a 4-jaw chuck (If I
can
> > find one).
> >
> > Art
> >
> >
> >
> > Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems, for CAD, CAM, EDM, and DRO.
> >
> > Addresses:
> > Post message: CAD_CAM_EDM_DRO@yahoogroups.com
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> > Moderator: jmelson@... timg@... [Moderator]
> > URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > bill,
> > List Manager
> >
> > FAQ: http://www.ktmarketing.com/faq.html
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
> >
> >
>
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
> FAQ: http://www.ktmarketing.com/faq.html
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

Discussion Thread

Art Fenerty 2001-04-19 13:58:28 UTC Chinese Lathes. ballendo@y... 2001-04-19 20:38:29 UTC Re: Chinese Lathes. Sven Peter, TAD S.A. 2001-04-20 05:45:48 UTC Re: [CAD_CAM_EDM_DRO] Chinese Lathes. Marcus & Eva 2001-04-20 07:56:27 UTC Re: [CAD_CAM_EDM_DRO] Chinese Lathes. hexagon@o... 2001-04-21 19:16:20 UTC Re: Chinese Lathes. Art Fenerty 2001-04-21 20:12:20 UTC Re: [CAD_CAM_EDM_DRO] Re: Chinese Lathes. Sven Peter, TAD S.A. 2001-04-22 06:08:22 UTC Re: [CAD_CAM_EDM_DRO] Re: Chinese Lathes. Art Fenerty 2001-04-22 06:55:39 UTC Re: [CAD_CAM_EDM_DRO] Re: Chinese Lathes. hexagon@o... 2001-04-22 08:38:01 UTC Re: Chinese Lathes. Tom Eldredge 2001-04-22 08:58:48 UTC Re: [CAD_CAM_EDM_DRO] Re: Chinese Lathes. Carol & Jerry Jankura 2001-04-22 10:38:19 UTC RE: [CAD_CAM_EDM_DRO] Re: Chinese Lathes. Art Fenerty 2001-04-22 11:36:29 UTC Re: [CAD_CAM_EDM_DRO] Re: Chinese Lathes. Sven Peter, TAD S.A. 2001-04-22 12:33:19 UTC Re: [CAD_CAM_EDM_DRO] Re: Chinese Lathes. Sven Peter, TAD S.A. 2001-04-22 12:38:45 UTC Re: [CAD_CAM_EDM_DRO] Re: Chinese Lathes. Sven Peter, TAD S.A. 2001-04-22 12:44:16 UTC Re: [CAD_CAM_EDM_DRO] Re: Chinese Lathes. hexagon@o... 2001-04-22 16:55:26 UTC Re: Chinese Lathes. dougrasmussen@c... 2001-04-22 17:46:55 UTC Re: Chinese Lathes. Art Fenerty 2001-04-22 18:03:15 UTC Re: [CAD_CAM_EDM_DRO] Re: Chinese Lathes. Jerry Kimberlin 2001-04-22 18:57:30 UTC Re: [CAD_CAM_EDM_DRO] Re: Chinese Lathes. stratton@m... 2001-04-22 20:01:44 UTC Re: [CAD_CAM_EDM_DRO] Re: Chinese Lathes. ballendo@y... 2001-04-23 06:10:29 UTC Chucks was Re: Chinese Lathes. ballendo@y... 2001-04-23 07:09:22 UTC it's a 7x10 was Re: Chinese Lathes. ballendo@y... 2001-04-23 07:54:23 UTC Re: Chinese Lathes. Joe Vicars 2001-04-23 08:22:55 UTC Re: [CAD_CAM_EDM_DRO] Re: Chinese Lathes. Smoke 2001-04-23 09:11:27 UTC Re: [CAD_CAM_EDM_DRO] Re: Chinese Lathes. indigo_red@q... 2001-04-23 10:42:14 UTC it's a 7x10 was Re: Chinese Lathes. ballendo@y... 2001-04-23 11:45:03 UTC Re: Chinese Lathes. hexagon@o... 2001-04-23 13:04:19 UTC Re: Chinese Lathes. Smoke 2001-04-23 14:59:36 UTC Re: [CAD_CAM_EDM_DRO] Re: Chinese Lathes. ballendo@y... 2001-04-24 03:52:47 UTC Import tool experiences was Re: Chinese Lathes. Tom Eldredge 2001-04-24 06:23:37 UTC Re: [CAD_CAM_EDM_DRO] it's a 7x10 was Re: Chinese Lathes. hexagon@o... 2001-04-24 14:24:52 UTC Re: Chinese Lathes. Alan Marconett KM6VV 2001-04-24 15:13:47 UTC Re: Chinese Lathes. Carol & Jerry Jankura 2001-04-24 16:21:33 UTC RE: [CAD_CAM_EDM_DRO] Re: Chinese Lathes. dave engvall 2001-04-24 17:04:42 UTC Re: [CAD_CAM_EDM_DRO] Re: Chinese Lathes. dave engvall 2001-04-24 17:09:41 UTC Re: [CAD_CAM_EDM_DRO] Re: Chinese Lathes. JanRwl@A... 2001-04-24 18:49:52 UTC Re: [CAD_CAM_EDM_DRO] Re: Chinese Lathes. rocketsmith@n... 2001-04-24 21:58:57 UTC Re: Chinese Lathes. Tim Goldstein 2001-04-24 22:26:38 UTC Pictures of Bridgett being delivered Donald Brock 2001-04-24 22:57:27 UTC Re: Pictures of Bridgett being delivered tauseef 2001-04-25 00:56:24 UTC Re: Pictures of Bridgett being delivered Alan Marconett KM6VV 2001-04-25 10:46:15 UTC Re: [CAD_CAM_EDM_DRO] Pictures of Bridgett being delivered JanRwl@A... 2001-04-26 18:57:40 UTC Re: [CAD_CAM_EDM_DRO] Pictures of Bridgett being delivered Tim Goldstein 2001-04-26 20:13:31 UTC RE: [CAD_CAM_EDM_DRO] Pictures of Bridgett being delivered JanRwl@A... 2001-04-26 20:34:00 UTC Re: [CAD_CAM_EDM_DRO] Pictures of Bridgett being delivered Tim Goldstein 2001-04-26 20:59:48 UTC RE: [CAD_CAM_EDM_DRO] Pictures of Bridgett being delivered Garry & Maxine Foster 2001-04-27 11:16:55 UTC RE: [CAD_CAM_EDM_DRO] Pictures of Bridgett being delivered indigo_red@q... 2001-04-27 12:11:52 UTC Re: Pictures of Bridgett....More Pictures!! machines@n... 2001-05-02 18:09:26 UTC Re: Pictures of Bridgett being delivered