CAD CAM EDM DRO - Yahoo Group Archive

Re: RF-45

on 2001-05-15 19:59:11 UTC
Hi Ray,

The G9748 is on the site, I just looked for it the wrong way! I looked
in with other mills that I knew were there.

Your G8689's are babies! 3" x 15" tables. The RF-45 tables are about
32" x 9.5".

Thanks for the comments!

Alan KM6VV

Ray wrote:
>
> From: Alan Marconett KM6VV <KM6VV@...>Subject: Re: RF-45
>
> <s>
> >A quick check on the Grizzly site didn't show a G9748, I'll check
> >the catalog at home!
>
> I've got two of the little dovetail z Grizzly mills here but they say that
> they are G8689's. I had one cnc'd at names that Joel ran with his
> beautiful control box. This mill seems to be a decent starter machine but
> you will have to do some work to get it set up right.. IMO you can't just
> do a bolt on job.
>
> Ray
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
> FAQ: http://www.ktmarketing.com/faq.html
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Discussion Thread

ptengin@a... 2001-05-15 03:14:22 UTC Re: [CAD_CAM_EDM_DRO] Re: RF-45 Alan Marconett KM6VV 2001-05-15 11:11:29 UTC Re: [CAD_CAM_EDM_DRO] Re: RF-45 Joe Vicars 2001-05-15 11:16:42 UTC Re: [CAD_CAM_EDM_DRO] Re: RF-45 Alan Marconett KM6VV 2001-05-15 12:09:25 UTC Re: RF-45 Drew Rogge 2001-05-15 12:18:16 UTC Re: [CAD_CAM_EDM_DRO] Re: RF-45 Drew Rogge 2001-05-15 12:21:40 UTC Re: [CAD_CAM_EDM_DRO] Re: RF-45 Joe Vicars 2001-05-15 12:21:54 UTC Re: [CAD_CAM_EDM_DRO] Re: RF-45 rfs@c... 2001-05-15 16:20:10 UTC Re: RF-45 Alan Marconett KM6VV 2001-05-15 16:33:10 UTC Re: RF-45 Drew Rogge 2001-05-15 16:53:13 UTC Re: [CAD_CAM_EDM_DRO] Re: RF-45 Alan Marconett KM6VV 2001-05-15 17:20:53 UTC Re: [CAD_CAM_EDM_DRO] Re: RF-45 Alan Marconett KM6VV 2001-05-15 17:43:27 UTC Re: [CAD_CAM_EDM_DRO] Re: RF-45 Alan Marconett KM6VV 2001-05-15 18:12:28 UTC Re: [CAD_CAM_EDM_DRO] Re: RF-45 Doug Harrison 2001-05-15 18:47:10 UTC Re: [CAD_CAM_EDM_DRO] Re: RF-45 Alan Marconett KM6VV 2001-05-15 19:59:11 UTC Re: RF-45 ballendo@y... 2001-05-15 20:15:22 UTC Reality check? was Re: RF-45 dave engvall 2001-05-15 20:19:18 UTC Re: [CAD_CAM_EDM_DRO] Re: RF-45 ptengin@a... 2001-05-17 01:35:14 UTC Re: [CAD_CAM_EDM_DRO] Re: RF-45