Re: What does everybody use...

On Wed, 19 May 1999 16:12:45 -0400, you wrote:

>From: Brian Fairey <bfairey@...>
>
>Ward, I also use AHHA gear and also plan to do a lathe using a Dan Mauch driver board and the AHHA software(very early style using
>the parallel port)
>Brian, Ont, Canada.

Brian,
Any chance on some more details of using the Ahha software with Dan's boards??
I also run Ahha and would be interested in going this way for a small
positioning table.
Can you use the later software for Artisan. I have version 3.2

>Ward Merkouris wrote:
>
>> From: Ward Merkouris <ward@...>
>>
>> Hi Jon,
>>
>> I'm new to the list, this is the first message received. As I have missed the previous messages, I'm wondering if the extra
>> boards you have made are for stepper motors or DC motors with encoders.
>>
>> I currently have an AHHA setup (4 axis) on a small bed mill but am interested in obtaining another set of motor drivers and
>> motors for use on a small lathe. The AHHA software and board issues step and direction signals oa TTL level. Would your boards
>> be compatible with this?
>>

Regards,
John Stevenson
Nottingham, England