Re: [CAD_CAM_EDM_DRO] 67 Amp 5 Volt Regulated Supply

Hi Jon,

Thanks! That'll be great! Basically, I'm looking for caps for these
voltage/current ranges:

Supply: 34V, 6A, cap: 35K, 40V
68V, 12A, cap: 60-80K, 75V

I'd be happy to cover postage. I was checking yesterday, and didn't
find ANY caps at Halted (surplus)! Lotta PC stuff, 'tho.

I did manage to find a rack-mount full height box, with nice PB's,
relays, power supplies, and some kind of processor in a shielded box.
Beautiful "Emergency stop" PB, I pressed it in, and it doesn't pop back
out! :>( I'm hoping there is a reset for it somewhere! Even several
DB 9, 25 and 34 cutouts on the back panel (not quite enough)!

Alan KM6VV



Jon Elson wrote:

>
> Alan Marconett KM6VV wrote:
>
> >
> > Currently, ;>) I have a STACK of 28v, 6A transformers, and I'm using
> > them to build my supplies. Now to find some quality CAPS!
>
> You need caps? I've got a HUGE box of electrolytic caps. I think I should
> have a good selection in the 25 - 75 V range, too. Let me know what
> you need (volts and uF) and I'll dig and see what I find. I've got somewhere
> around 150 Lbs of this stuff, and will be glad to lower the volume a bit
> if you'll just cover postage.
>
> Jon
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/