Re: [CAD_CAM_EDM_DRO] 67 Amp 5 Volt Regulated Supply

Hi Jon,

The 48000 uF @ 40 vdc sounds great! I'll hold off on the higher voltage
supply then, until I can find some bigger caps.

Thanks again for the generous offer!

Alan KM6VV

Jon Elson wrote:

>
> Alan Marconett KM6VV wrote:
>
> > Hi Jon,
> >
> > Thanks! That'll be great! Basically, I'm looking for caps for these
> > voltage/current ranges:
> >
> > Supply: 34V, 6A, cap: 35K, 40V
> > 68V, 12A, cap: 60-80K, 75V
> >
> > I'd be happy to cover postage. I was checking yesterday, and didn't
> > find ANY caps at Halted (surplus)! Lotta PC stuff, 'tho.
>
> I finally got time to dig out the big box of caps. I've got just the thing
> for the first one, 48000 uF, 40 VDC.
>
> As for the second, it is not so easy. Here's what I got :
>
> 4 ea 2500 uF 80 V
> 3 ea 3450 uF 75 V
> 1 ea 3900 uF 75 V
> 1 ea 4400 uF 75 V
> 1 ea 8200 uF 75 V
> That only adds up to 36850 uF.
>
> I also have some 4500 uF 200 V caps, but they're pretty big.
>
> Let me know what you want to do about this.
>
> Jon