Re: [CAD_CAM_EDM_DRO] Re: Tool up
Posted by
Jon Elson
on 2001-09-17 01:01:12 UTC
info.host@... wrote:
push that the overload clutch is designed to slip at, so there's no need to
worry about breaking things, unless the clutch is misadjusted.
The real reason for the 3/8 (I thought it was 1/2") limit is the feedrate
is .006" per revolution, maximum. I think you need a faster feed for the
larger bits.
The Bridgeport is a standard which pretty much everyone knows, but
there are better machines.
Jon
>The Bridgeport feed gears are enough to handle the 200 Lbs of linear
> > The feed gearbox on a Bridgy is a joke. I've got bigger
> > gears in my wrist watch. The book even says "Don't use quill feed
> > with a tool greater than 3/8"
> > 3/8" ?? On a one ton machine?? what a hoot.
push that the overload clutch is designed to slip at, so there's no need to
worry about breaking things, unless the clutch is misadjusted.
The real reason for the 3/8 (I thought it was 1/2") limit is the feedrate
is .006" per revolution, maximum. I think you need a faster feed for the
larger bits.
The Bridgeport is a standard which pretty much everyone knows, but
there are better machines.
Jon
Discussion Thread
info.host@b...
2001-09-15 13:47:58 UTC
Tool up
machines@n...
2001-09-15 17:31:05 UTC
Re: Tool up
info.host@b...
2001-09-15 18:04:26 UTC
Re: [CAD_CAM_EDM_DRO] Re: Tool up
Sven Peter
2001-09-15 20:03:41 UTC
Re: [CAD_CAM_EDM_DRO] Tool up
Les Newell
2001-09-16 02:23:23 UTC
Re: [CAD_CAM_EDM_DRO] Re: Tool up
info.host@b...
2001-09-16 03:02:36 UTC
Re: [CAD_CAM_EDM_DRO] Tool up
machines@n...
2001-09-16 04:26:58 UTC
Re: Tool up
machines@n...
2001-09-16 04:49:08 UTC
Re: Tool up
info.host@b...
2001-09-16 05:44:28 UTC
Re: [CAD_CAM_EDM_DRO] Re: Tool up
machines@n...
2001-09-16 06:18:30 UTC
Re: Tool up
Sven Peter
2001-09-16 07:59:22 UTC
Re: [CAD_CAM_EDM_DRO] Tool up
Sven Peter
2001-09-16 07:59:25 UTC
Re: [CAD_CAM_EDM_DRO] Re: Tool up
Sven Peter
2001-09-16 07:59:37 UTC
Re: [CAD_CAM_EDM_DRO] Re: Tool up
Smoke
2001-09-16 08:08:01 UTC
Re: [CAD_CAM_EDM_DRO] Tool up
Jon Elson
2001-09-17 01:00:11 UTC
Re: [CAD_CAM_EDM_DRO] Tool up
Jon Elson
2001-09-17 01:01:12 UTC
Re: [CAD_CAM_EDM_DRO] Re: Tool up