CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] EMC Lathe mode.

Posted by Jon Elson
on 2001-10-01 22:32:29 UTC
wanliker@... wrote:

> It would also be nice to have radius/diameter inputs on the Z axis, also
> inch/mm option.

EMC should be able to do all that with the Tcl/TK front end to the GUI.
IN/mm should be in there, but I have heard of a few quirks with the
G54 offsets and such.

Jon

Discussion Thread

Art Fenerty 2001-10-01 17:28:52 UTC EMC Lathe mode. Doug Fortune 2001-10-01 17:50:47 UTC Re: [CAD_CAM_EDM_DRO] EMC Lathe mode. Art Fenerty 2001-10-01 17:58:53 UTC Re: [CAD_CAM_EDM_DRO] EMC Lathe mode. wanliker@a... 2001-10-01 18:20:05 UTC Re: [CAD_CAM_EDM_DRO] EMC Lathe mode. Doug Fortune 2001-10-01 19:29:07 UTC Re: [CAD_CAM_EDM_DRO] EMC Lathe mode. currinh@O... 2001-10-01 19:59:01 UTC Re: EMC Lathe mode. wanliker@a... 2001-10-01 21:27:04 UTC Re: [CAD_CAM_EDM_DRO] EMC Lathe mode. Jon Elson 2001-10-01 22:27:26 UTC Re: [CAD_CAM_EDM_DRO] EMC Lathe mode. Jon Elson 2001-10-01 22:30:39 UTC Re: [CAD_CAM_EDM_DRO] EMC Lathe mode. Jon Elson 2001-10-01 22:32:29 UTC Re: [CAD_CAM_EDM_DRO] EMC Lathe mode. Jon Elson 2001-10-01 22:38:41 UTC Re: [CAD_CAM_EDM_DRO] EMC Lathe mode. Brian Pitt 2001-10-02 02:13:35 UTC Re: [CAD_CAM_EDM_DRO] EMC Lathe mode. Art Fenerty 2001-10-02 04:49:58 UTC Re: [CAD_CAM_EDM_DRO] EMC Lathe mode. Doug Fortune 2001-10-02 07:22:19 UTC Re: [CAD_CAM_EDM_DRO] EMC Lathe mode. Jon Elson 2001-10-02 10:46:54 UTC Re: [CAD_CAM_EDM_DRO] EMC Lathe mode. Ethan Vos 2001-10-02 10:58:41 UTC RE: [CAD_CAM_EDM_DRO] EMC Lathe mode. Jon Elson 2001-10-02 11:00:51 UTC Re: [CAD_CAM_EDM_DRO] EMC Lathe mode. Brian Pitt 2001-10-02 11:41:54 UTC Re: [CAD_CAM_EDM_DRO] EMC Lathe mode. Paul 2001-10-02 12:11:28 UTC Re: [CAD_CAM_EDM_DRO] EMC Lathe mode. Art Fenerty 2001-10-02 12:19:07 UTC Re: [CAD_CAM_EDM_DRO] EMC Lathe mode. Ray 2001-10-02 13:48:44 UTC Re: Re: EMC Lathe mode. jhtkcarn@a... 2001-10-02 14:21:06 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: EMC Lathe mode. beer@s... 2001-10-02 14:40:22 UTC Re: Re: EMC Lathe mode. ccs@m... 2001-10-02 14:58:07 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: EMC Lathe mode. Art Fenerty 2001-10-02 15:24:46 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: EMC Lathe mode. Fred Smith 2001-10-02 15:57:59 UTC Re: EMC Lathe mode. Art Fenerty 2001-10-02 16:06:37 UTC Re: [CAD_CAM_EDM_DRO] Re: EMC Lathe mode. Jon Elson 2001-10-02 20:09:25 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: EMC Lathe mode. Jon Elson 2001-10-02 20:53:24 UTC Re: [CAD_CAM_EDM_DRO] EMC Lathe mode. Jon Elson 2001-10-02 21:04:42 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: EMC Lathe mode. Donald Brock 2001-10-03 02:52:39 UTC Re: EMC Lathe mode.