Re: [CAD_CAM_EDM_DRO] Re: Re: EMC Lathe mode.

> From: Jon Elson <elson@...>
>
> >Brian Pitt wrote:
> <s>
> >> a preset tool change position (X positive limit) and just use T020202
> >> (tool 2 , pocket 2 , offset 2) calling that tool with a 2nd offset
> >would be
> >> T020222
>
> <s>The T020202 you mention is also a non-standard
> >use of the tool word. A D word following the T word provides the correct
> >offsets for the selected t.
>
> Jon, Brian
>
> My Fagor 8025 uses M06 for a tool change and T##.## where the left of the
> dot is the tool number between 1 and 99 and the right of the dot is the
> offset between 1 and 32.