Re: [CAD_CAM_EDM_DRO] Re: RE: 3d-from-2d

Dave:

Amorphium sounds much more reasonable, and probably has more gadgets
for you to play with as well, if you don't have need of a control as well,
I'd take a close look at it.

Art
Master5 Software
http://users.andara.com/~fenerty/master.htm

----- Original Message -----
From: "IMService" <imserv@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Thursday, October 04, 2001 3:48 PM
Subject: [CAD_CAM_EDM_DRO] Re: RE: 3d-from-2d


> > Date: Thu, 4 Oct 2001 13:38:52 -0400
> > From: dlantz@...
> >Subject: RE: 3d-from-2d
> >
> >Thanks for the quick answere! what i was orginally looking at was a man
> >who
> >did actual 3d portraits in stone of people based of photographs. the
first
> >step was to create a surface with some software (darn it, should have
> >written it down!) from the tones of the photograph itself... can master5
do
> >this? mastercam only does 2d g-code from jpgs and bmps...
> >
>
> There are 4 or 5 stand alone programs that can create this kind of form.
In some 3D programs it is called a height field. Amorphium is one of the
lower cost modelers that can create a height field, it has options for
cylindrical, planar, or spherical application. It has lots of other nifty
features too. One of the neatest things about it is that the demo is a 24
hour clock. It does not expire in 30 days or after 100 uses, but only after
you have actually spent 24 hours playing with it. Plenty of time to learn
how to use it for developing a height field.
>
> www.amorphium.com
>
> As I was writing this posting, I checked and Amorphium has dropped the
price to $119 downloadable.
>
> Best Regards,
>
> Fred Smith
> IMService
>
> imserv@...
>
> Voice:248-486-3600 or 800-386-1670
> Fax: 248-486-3698
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>