RE: [CAD_CAM_EDM_DRO] Re: RE: 3d-from-2d

sounds good, however, amorphium doens't appear to output stl files?
STLworks only works with stl files. Does anyone know of a good translator
from 3ds (or something amorphium does) to stl?
---thanks, Dave L.


-----Original Message-----
From: Fred Smith [mailto:imserv@...]
Sent: Thursday, October 04, 2001 5:11 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Re: RE: 3d-from-2d

--- In CAD_CAM_EDM_DRO@y..., dlantz@a... wrote:
> finished downloading it and installed it. seems very powerfull.
watched
> the posts from several days back and downloaded a trial of
millwizard too.
> it appears that i can create the surface with amoophium and then
mill it
> with millwizard!

When you get tired of watching the cutter passing over parts of the
model that you don't need cut, be sure to check out StlWork.com. It
will eliminate flats within the rectangular extents and can also cut
just the portion of the model you want in X or Y or "Z", and can also
cut with waterline strategies that eliminate the slower Z axis from
90% of the cuts. 30 day full working demo too.


Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/

Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Manager



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/