RE: [CAD_CAM_EDM_DRO] Re: RE: 3d-from-2d

no, it doens't create G-Code, it's only a modeler. it outputs files in 2d &
3d, WHICH can then be translated into G-Code. I personally would like to
have these as different programs, to allow more modularity... and for
perhaps, using the modeler to create other stuff (web graphics or whatever)
---Dave L.

-----Original Message-----
From: Smoke [mailto:smoke@...]
Sent: Thursday, October 04, 2001 6:07 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] Re: RE: 3d-from-2d


I've just taken a gander at the amorphism site. What I see there leads me
to believe the only "3D" that's involved is that used on screen.

I don't see anything that indicates the program can be used to generate
files which could be output to a CAM program for generating G code.

Smoke

----- Original Message -----
From: "Art Fenerty" <fenerty@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Thursday, October 04, 2001 2:47 PM
Subject: Re: [CAD_CAM_EDM_DRO] Re: RE: 3d-from-2d


> Dave:
>
> Amorphium sounds much more reasonable, and probably has more
gadgets
> for you to play with as well, if you don't have need of a control as well,
> I'd take a close look at it.
>
> Art
> Master5 Software
> http://users.andara.com/~fenerty/master.htm
>
> ----- Original Message -----
> From: "IMService" <imserv@...>
> To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> Sent: Thursday, October 04, 2001 3:48 PM
> Subject: [CAD_CAM_EDM_DRO] Re: RE: 3d-from-2d
>
>
> > > Date: Thu, 4 Oct 2001 13:38:52 -0400
> > > From: dlantz@...
> > >Subject: RE: 3d-from-2d
> > >
> > >Thanks for the quick answere! what i was orginally looking at was a
man
> > >who
> > >did actual 3d portraits in stone of people based of photographs. the
> first
> > >step was to create a surface with some software (darn it, should have
> > >written it down!) from the tones of the photograph itself... can
master5
> do
> > >this? mastercam only does 2d g-code from jpgs and bmps...
> > >
> >
> > There are 4 or 5 stand alone programs that can create this kind of form.
> In some 3D programs it is called a height field. Amorphium is one of the
> lower cost modelers that can create a height field, it has options for
> cylindrical, planar, or spherical application. It has lots of other nifty
> features too. One of the neatest things about it is that the demo is a 24
> hour clock. It does not expire in 30 days or after 100 uses, but only
after
> you have actually spent 24 hours playing with it. Plenty of time to learn
> how to use it for developing a height field.
> >
> > www.amorphium.com
> >
> > As I was writing this posting, I checked and Amorphium has dropped the
> price to $119 downloadable.
> >
> > Best Regards,
> >
> > Fred Smith
> > IMService
> >
> > imserv@...
> >
> > Voice:248-486-3600 or 800-386-1670
> > Fax: 248-486-3698
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> >
> > Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> > Moderator: jmelson@... timg@... [Moderator]
> > URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > bill,
> > List Manager
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>


Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/

Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Manager



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/