CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Found a commercial CNC pendant

Posted by Chris L
on 2001-10-26 18:31:55 UTC
I have been using the complete keypad offered by those same guys for at least
a year now with FlashCut. Works excellent except for the vague feeling
buttons on the pad. It can automate any program, windows or dos because it is
simply a keyboard emulator that plugs in series with the existing keyboard.
The advantage is that "each Key" can be programmed with numerous keys like
thos pesky Alt-Ctrl combinations.

I think it could handle 256 individual keys on each button. Not a bad device
for under $100 !!!

Your project by using just the board should prove to be quite interesting.
keep us posted............

Chris L


>
> Someone wrote:
> I've sent for and just recieved a small board that will do just this.
> The link is at:-
> http://www.ymouse.com/whitepages/wpxkmatrixps2.htm
> It's fully programable and you can even nest commands like Cntl F6
> onto one key.
> I aim to use the 5 x 4, plus two 1 x 4 tactile keypads with this.
> It's ideal as trying to get the pads to work with a normal keyboard
> chip is impossible due to the matrix layout. It can be done but not
> if you want a certain layout of keys.
>
>

Discussion Thread

Jon Anderson 2001-10-26 10:21:11 UTC Found a commercial CNC pendant Carlos Guillermo 2001-10-26 13:15:26 UTC RE: [CAD_CAM_EDM_DRO] Found a commercial CNC pendant todmorg@h... 2001-10-26 13:26:03 UTC Re: Master5 with joystick machines@n... 2001-10-26 13:46:09 UTC Re: Found a commercial CNC pendant wanliker@a... 2001-10-26 14:19:19 UTC Re: [CAD_CAM_EDM_DRO] Found a commercial CNC pendant Hire, Ejay 2001-10-26 14:22:12 UTC RE: [CAD_CAM_EDM_DRO] Found a commercial CNC pendant Jon Anderson 2001-10-26 14:26:40 UTC Re: [CAD_CAM_EDM_DRO] Found a commercial CNC pendant Carlos Guillermo 2001-10-26 16:05:14 UTC RE: [CAD_CAM_EDM_DRO] Found a commercial CNC pendant Art Fenerty 2001-10-26 16:23:48 UTC Re: [CAD_CAM_EDM_DRO] Found a commercial CNC pendant Jon Anderson 2001-10-26 17:26:37 UTC Re: [CAD_CAM_EDM_DRO] Found a commercial CNC pendant Alan Marconett KM6VV 2001-10-26 18:07:20 UTC Re: [CAD_CAM_EDM_DRO] Found a commercial CNC pendant wanliker@a... 2001-10-26 18:30:54 UTC Re: [CAD_CAM_EDM_DRO] Re: Found a commercial CNC pendant Chris L 2001-10-26 18:31:55 UTC Re: [CAD_CAM_EDM_DRO] Re: Found a commercial CNC pendant Carlos Guillermo 2001-10-26 19:47:00 UTC RE: [CAD_CAM_EDM_DRO] Found a commercial CNC pendant machines@n... 2001-10-27 00:13:01 UTC Re: Found a commercial CNC pendant