Re: [CAD_CAM_EDM_DRO] Machinable Wax, Foam, etc.
Posted by
Brian Pitt
on 2001-10-28 17:57:47 UTC
for just testing a program or the fit of a new part the
hardwood should do ok
a friend of mine uses a scrap part re-built with BONDO to dial
in offsets and test new versions of the part programs
not exactly the cheapest way to do it but if you mess up you
can just slap another layer on and try again
HTH
Brian
hardwood should do ok
a friend of mine uses a scrap part re-built with BONDO to dial
in offsets and test new versions of the part programs
not exactly the cheapest way to do it but if you mess up you
can just slap another layer on and try again
HTH
Brian
Discussion Thread
Boris Maraž
2001-10-28 08:44:45 UTC
setting up the CNC mill
currinh@O...
2001-10-28 17:05:44 UTC
Re: setting up the CNC mill
currinh@O...
2001-10-28 17:30:41 UTC
Machinable Wax, Foam, etc.
Brian Pitt
2001-10-28 17:57:47 UTC
Re: [CAD_CAM_EDM_DRO] Machinable Wax, Foam, etc.
Doug Harrison
2001-10-28 17:59:47 UTC
Re: [CAD_CAM_EDM_DRO] Machinable Wax, Foam, etc.
David M. Munro
2001-10-28 19:10:41 UTC
Re: [CAD_CAM_EDM_DRO] Machinable Wax, Foam, etc.
ccs@m...
2001-10-28 19:29:52 UTC
Re: [CAD_CAM_EDM_DRO] Re: setting up the CNC mill
FIK
2001-10-28 20:02:00 UTC
Re: [CAD_CAM_EDM_DRO] Re: setting up the CNC mill
FIK
2001-10-28 20:31:07 UTC
Re: [CAD_CAM_EDM_DRO] Machinable Wax, Foam, etc.
Jon Elson
2001-10-28 22:55:10 UTC
Re: [CAD_CAM_EDM_DRO] Machinable Wax, Foam, etc.
Jon Elson
2001-10-28 23:08:01 UTC
Re: [CAD_CAM_EDM_DRO] Re: setting up the CNC mill
dkowalcz@d...
2001-10-28 23:08:16 UTC
Re: setting up the CNC mill
vrojas
2001-10-29 00:19:00 UTC
Re: [CAD_CAM_EDM_DRO] Re: setting up the CNC mill
Boris Maraž
2001-11-03 10:57:02 UTC
Re: [CAD_CAM_EDM_DRO] Re: setting up the CNC mill
cncdxf@a...
2001-11-03 11:15:59 UTC
Re: setting up the CNC mill
Chris L
2001-11-03 11:53:06 UTC
Re: [CAD_CAM_EDM_DRO] Re: setting up the CNC mill
ccs@m...
2001-11-03 12:10:22 UTC
Re: [CAD_CAM_EDM_DRO] Re: setting up the CNC mill