Re: [CAD_CAM_EDM_DRO] Need Engravng Software

Check out Deskam at:

http://deskam.com/

They have a free true type font engraving program called desk engrave that
will generate the G-Code. I recommend staying with the default single line
font, unless you have artist reason to change it. To get the mirror image
you can edit the G-Code and reverse the sign on the values on the x-axis (or
whichever way you orient the part).

HTH,

Daniel J. Statman, Statman Designs
www.statmandesigns.com

----- Original Message -----
From: "Bob Bachman" <bobach@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Friday, November 16, 2001 5:41 PM
Subject: [CAD_CAM_EDM_DRO] Need Engravng Software


> I need some software to create gcode to mill a part number
> into some molds I'm building. The numbers need to be about
> 3/8" high and be mirror image so they read properly on the
> molded part.
>
> Thanks,
>
> Bob
>
> Bob Bachman
>
> "It's our choices that show what we truly are,
> far more than our abilities" - A. Dumbledore
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>