RE: [CAD_CAM_EDM_DRO] Need Engravng Software

Bob

Dolphin can engrave both True Type Fonts and
simple Centre line Fonts.

michael

-----Original Message-----
From: Bob Bachman [mailto:bobach@...]
Sent: 16 November 2001 17:42
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Need Engravng Software


I need some software to create gcode to mill a part number
into some molds I'm building. The numbers need to be about
3/8" high and be mirror image so they read properly on the
molded part.

Thanks,

Bob

Bob Bachman

"It's our choices that show what we truly are,
far more than our abilities" - A. Dumbledore

Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/

Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Manager



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/