Re: [CAD_CAM_EDM_DRO] Servos & Encoders
Posted by
Jon Elson
on 2001-12-09 22:18:24 UTC
Chris Clough wrote:
http://206.19.206.56/cadfaq.htm
Jon
> Hi all,The CAD_CAM home page has some info on this at
> Going to be looking into building another table soon, and want
> to use servos instead of steppers. Any info on the net that I could read
> that could inform me more about how servos and the encoders work?
> Any info would be great - thanks,
http://206.19.206.56/cadfaq.htm
Jon
Discussion Thread
Dany Tremblay
2001-12-06 16:43:11 UTC
BALL SCREW INFO
Art Fenerty
2001-12-06 18:00:24 UTC
Re: [CAD_CAM_EDM_DRO] BALL SCREW INFO
Chris Clough
2001-12-06 18:07:15 UTC
Precision
Alan Marconett KM6VV
2001-12-06 18:12:18 UTC
Re: [CAD_CAM_EDM_DRO] Precision
Chris Clough
2001-12-06 18:15:31 UTC
RE: [CAD_CAM_EDM_DRO] Precision
Alan Marconett KM6VV
2001-12-06 18:42:31 UTC
Re: [CAD_CAM_EDM_DRO] Precision
currinh@O...
2001-12-06 18:53:17 UTC
Re: BALL SCREW INFO
JanRwl@A...
2001-12-06 19:19:10 UTC
Re: [CAD_CAM_EDM_DRO] BALL SCREW INFO
Bob Campbell
2001-12-06 19:28:54 UTC
Re: [CAD_CAM_EDM_DRO] Precision
Bill Vance
2001-12-07 02:08:39 UTC
Re: [CAD_CAM_EDM_DRO] Re: BALL SCREW INFO
Keith Rumley
2001-12-07 09:29:34 UTC
Re: [CAD_CAM_EDM_DRO] BALL SCREW INFO
N & K McLellan
2001-12-08 05:57:42 UTC
Re: [CAD_CAM_EDM_DRO] Precision
Chris Clough
2001-12-09 22:14:46 UTC
Servos & Encoders
Jon Elson
2001-12-09 22:18:24 UTC
Re: [CAD_CAM_EDM_DRO] Servos & Encoders