Re: can you scale a part using Dolphin CAD/CAM

I was unable to locate a "scale" menuitem. Does anyone know to
scale in Dolphin CAD?

--- In CAD_CAM_EDM_DRO@y..., "follicely_challenged"
<dave_pearson@b...> wrote:

> Definitely use Dolphin, you can either scale the drawing (or parts
> of) in the CAD side, and the CAM will machine to these sizes, or,

you

> can use the 'step and repeat' sequence (with a repeat of '0')in

the

> CAM module to apply a scale factor to the machining.
> I personally would use the second option because a CAD drawing

should

> never be scaled!
>
> HTH
>
> Dave Pearson
> --- In CAD_CAM_EDM_DRO@y..., "mszollar" <mszollar@g...> wrote:
> > If I want to mill a part that is 5x5, but I want to create a 1/2
> > size can I scale it using Dolphin CAD/CAM or should I stich with
> > scaling using NC?