Re: [CAD_CAM_EDM_DRO] Re: can you scale a part using Dolphin CAD/CAM
Posted by
Smoke
on 2001-12-16 08:04:55 UTC
IMO an "accident" like that would be due more to poor drafting practices
than anything else.
An enlarged view such as you indicate should be dimensioned in the enlarged
view. This means it's up to the draftsman (or the checker) to get it right.
If the CAM program is run "correctly" it would use the original size drawing
for generating tool paths...not the enlargement.
Smoke
than anything else.
An enlarged view such as you indicate should be dimensioned in the enlarged
view. This means it's up to the draftsman (or the checker) to get it right.
If the CAM program is run "correctly" it would use the original size drawing
for generating tool paths...not the enlargement.
Smoke
> Just imagine you have a small 0.020" undercut in a part and you want
> to do an enlarged view to show detail, a keyhole view.
> You scale this up by say three to get good detail for the machinist
> to see but the undercut is now 0.060" wide on the keyhole view but
> still 0.020" on the main drawing. That's an accident looking to
> happen.
>
> John S.
>
>
Discussion Thread
mszollar
2001-12-15 00:24:59 UTC
can you scale a part using Dolphin CAD/CAM
follicely_challenged
2001-12-15 01:31:53 UTC
Re: can you scale a part using Dolphin CAD/CAM
stevenson_engineers
2001-12-15 01:43:26 UTC
Re: can you scale a part using Dolphin CAD/CAM
Marcus & Eva
2001-12-15 08:56:27 UTC
Re: [CAD_CAM_EDM_DRO] Re: can you scale a part using Dolphin CAD/CAM
Smoke
2001-12-15 09:18:14 UTC
Re: [CAD_CAM_EDM_DRO] Re: can you scale a part using Dolphin CAD/CAM
mszollar
2001-12-15 09:41:12 UTC
Re: can you scale a part using Dolphin CAD/CAM
Michael Milligan
2001-12-15 12:53:51 UTC
RE: [CAD_CAM_EDM_DRO] Re: can you scale a part using Dolphin CAD/CAM
follicely_challenged
2001-12-15 21:33:16 UTC
Re: can you scale a part using Dolphin CAD/CAM
Smoke
2001-12-15 23:18:09 UTC
Re: [CAD_CAM_EDM_DRO] Re: can you scale a part using Dolphin CAD/CAM
stevenson_engineers
2001-12-16 01:51:54 UTC
Re: can you scale a part using Dolphin CAD/CAM
Smoke
2001-12-16 08:04:55 UTC
Re: [CAD_CAM_EDM_DRO] Re: can you scale a part using Dolphin CAD/CAM
stevenson_engineers
2001-12-16 09:47:56 UTC
Re: can you scale a part using Dolphin CAD/CAM