Re: Re: Spindle motor drive belts MAXNC 10 UPDATE

Ian,
Yes I did a reload, I know about the "cache"... As I said others have
tested it using IE5 and Communicator 4.6 and 4.7 without any problems
Could somebody on this list please try http://home.swbell.net/hans_w
and tell Ian if it works or tell me it does not !
regards
Hans Wedemeyer

Ian Wright wrote:

> Ok Hans, I'll have another play with my browser - perhaps there's a
> version
> conflict somewhere. I assume you did a 'refresh' or 'reload' so as not
> to be
> just using a cached version. I'm a little puzzled why it has started
> working
> in Netscape without me changing anything.
>
> Ian
> --
> Ian W. Wright
> Sheffield UK
>
>
> ----- Original Message -----
> From: hansw <hansw@...>
> To: <CAD_CAM_EDM_DRO@onelist.com>
> Sent: 07 November 1999 01:20
> Subject: Re: [CAD_CAM_EDM_DRO] Re: Spindle motor drive belts MAXNC 10
> UPDATE
>
>
> > From: hansw <hansw@...>
> >
> > Hi Ian,
> > Well I had independent people over here try it with both..... I
> suspect
> > it's something at your end.
> > regards
> > Hans Wedemeyer
> >
> > Ian Wright wrote:
> >
> > > Hi Hans,
> > >
> > > It now works OK for me in Netscape 4.6 but still doesn't in IE5. I
> > > wondered
> > > if it was a Java problem but I do seem to have Jave properly
> enabled
> > > in IE5.
> > > I still get placeholders where the button images should be.
> Clicking
> > > on the
> > > space with either mouse button has no effect - i.e. it neither
> > > produces a
> > > URL nor an invitation to 'view image' etc. - strange!
> > >
> > > Ian
> > > --
> > > Ian W. Wright
> > > Sheffield UK
> > >
> > >
> > > ----- Original Message -----
> > > From: hansw <hansw@...>
> > > To: <CAD_CAM_EDM_DRO@onelist.com>
> > > Sent: 06 November 1999 01:15
> > > Subject: Re: [CAD_CAM_EDM_DRO] Re: Spindle motor drive belts MAXNC
> 10
> > > UPDATE
> > >
> > >
> > > > From: hansw <hansw@...>
> > > >
> > > > Ian,
> > > > Just check using Netscape and IE5 works OK. I checked the CNC
> page
> > > > images and they are all working fine...
> > > > Hans Wedemeyer
> > > > Ex Norwich Norfolk... Yes even with a name like that...
> > > >
> > > > Ian Wright wrote:
> > > >
> > > > > Hans,
> > > > >
> > > > > I looked at your home page but found that none of the links
> work.
> > > In
> > > > > Internet Explorer 5 I get place holders where the images
> should be
> > > but
> > > > > no
> > > > > links - not even the link address when the cursor is over an
> image
> > > > > location.
> > > > > In Netscape Communicator 4.6 I do not even get the image
> > > placeholders.
> > > > > Is
> > > > > the problem on your site or with my browsers?
> > > > >
> > > > > Ian
> > > > > --
> > > > > Ian W. Wright
> > > > > Sheffield UK
> > > > >
> > > > >
> > > > > ----- Original Message -----
> > > > > From: hansw ?hansw@...?
> > > > > ?
> > > > > ? Just in case you don;t already have it my web site
> > > > > ? http://home.swbell.net/hans_w
> > > > > ?
> > > > > ? regards
> > > > > ? Hans Wedemeyer
> > > > >
> > > > >
> > > > >
> > > > >
> > >
> ------------------------------------------------------------------------
> > > > > Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for
> the
> > > > > discussion of shop built systems in the above catagories.
> > > > > To Unsubscribe, read archives, change to or from digest.
> > > > > Go to: http://www.onelist.com/isregistered.cgi
> > > > > Log on, and you will go to Member Center, and you can make
> changes
> > > > > there.
> > > > > For the FAQ, go to http://www.ktmarketing.com/faq.html
> > > > > bill,
> > > > > List Manager
> > > > >
> > > > >
> > > ----------------------------------------------------------------
> > > > > [Image]
> > > > > Click Here
> > > > >
> > > >
> > > > > Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for
> the
> > > discussion of shop built systems in the above catagories.
> > > > To Unsubscribe, read archives, change to or from digest.
> > > > Go to: http://www.onelist.com/isregistered.cgi
> > > > Log on, and you will go to Member Center, and you can make
> changes
> > > there.
> > > > For the FAQ, go to http://www.ktmarketing.com/faq.html
> > > > bill,
> > > > List Manager
> > > >
> > >
> > >
> > >
> ------------------------------------------------------------------------
> > > Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
> > > discussion of shop built systems in the above catagories.
> > > To Unsubscribe, read archives, change to or from digest.
> > > Go to: http://www.onelist.com/isregistered.cgi
> > > Log on, and you will go to Member Center, and you can make changes
> > > there.
> > > For the FAQ, go to http://www.ktmarketing.com/faq.html
> > > bill,
> > > List Manager
> > >
> > >
> ----------------------------------------------------------------
> > > [Image]
> > > Click Here
> > >
> >
> > > Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
> discussion of shop built systems in the above catagories.
> > To Unsubscribe, read archives, change to or from digest.
> > Go to: http://www.onelist.com/isregistered.cgi
> > Log on, and you will go to Member Center, and you can make changes
> there.
> > For the FAQ, go to http://www.ktmarketing.com/faq.html
> > bill,
> > List Manager
> >
>
>
>
> ------------------------------------------------------------------------
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
> discussion of shop built systems in the above catagories.
> To Unsubscribe, read archives, change to or from digest.
> Go to: http://www.onelist.com/isregistered.cgi
> Log on, and you will go to Member Center, and you can make changes
> there.
> For the FAQ, go to http://www.ktmarketing.com/faq.html
> bill,
> List Manager
>
> ----------------------------------------------------------------
> [Image]
> Click Here
>