CAD CAM EDM DRO - Yahoo Group Archive

Re: Big, Cheap Power for Steppers

Posted by studleylee
on 2002-02-14 09:59:45 UTC
Hi Jan,
Is the opposite generally an ok practice, applying 120 VAC to a
primary originally 220 VAC.
-Lee

>
> turns/volt" is nominally constant. If you should apply 240 VAC to
a primary
> wound instead for only 120 VAC, the transformer will quickly take
up the very
> unhealthful habit of smoking, and the secondary output will
be "double" for a
> near a transformer which had been so-wound with the iron-core in
place! I

Discussion Thread

Walter 2002-02-11 08:15:11 UTC Big, Cheap Power for Steppers Smoke 2002-02-11 08:51:58 UTC Re: [CAD_CAM_EDM_DRO] Big, Cheap Power for Steppers James Owens 2002-02-11 16:38:56 UTC Re: [CAD_CAM_EDM_DRO] Big, Cheap Power for Steppers William Scalione 2002-02-11 17:10:33 UTC Re: [CAD_CAM_EDM_DRO] Big, Cheap Power for Steppers JanRwl@A... 2002-02-11 17:54:15 UTC Re: [CAD_CAM_EDM_DRO] Big, Cheap Power for Steppers Raymond Heckert 2002-02-11 20:35:57 UTC Re: [CAD_CAM_EDM_DRO] Big, Cheap Power for Steppers Chris L 2002-02-11 22:45:18 UTC Re: [CAD_CAM_EDM_DRO] Big, Cheap Power for Steppers ericgraham 2002-02-12 12:47:26 UTC Re: Big, Cheap Power for Steppers JanRwl@A... 2002-02-12 13:59:22 UTC Re: [CAD_CAM_EDM_DRO] Re: Big, Cheap Power for Steppers ccs@m... 2002-02-12 14:20:48 UTC Re: [CAD_CAM_EDM_DRO] Re: Big, Cheap Power for Steppers JanRwl@A... 2002-02-12 14:36:41 UTC Re: [CAD_CAM_EDM_DRO] Re: Big, Cheap Power for Steppers James Owens 2002-02-12 14:53:30 UTC Re: [CAD_CAM_EDM_DRO] Big, Cheap Power for Steppers Raymond Heckert 2002-02-12 21:49:05 UTC Re: [CAD_CAM_EDM_DRO] Big, Cheap Power for Steppers JanRwl@A... 2002-02-13 19:09:52 UTC Re: [CAD_CAM_EDM_DRO] Big, Cheap Power for Steppers Hugh Prescott 2002-02-14 09:41:39 UTC Re: [CAD_CAM_EDM_DRO] Big, Cheap Power for Steppers studleylee 2002-02-14 09:59:45 UTC Re: Big, Cheap Power for Steppers JanRwl@A... 2002-02-14 19:35:30 UTC Re: [CAD_CAM_EDM_DRO] Re: Big, Cheap Power for Steppers