Re: [CAD_CAM_EDM_DRO] Big, Cheap Power for Steppers
Posted by
James Owens
on 2002-02-11 16:38:56 UTC
Hi,
This is very interesting as Microwave ovens have now joined the throw-away
not worth repairing because a new one is so cheap.
| Most transformers give you 1 volt per winding on the secondary.
| Use big wire, #12 household wire works good. You have lots of room.
What is this #12 household wire. We have a different standard here and wire
is measure in millimetres. Could you give a micrometer measure in thousands
of an inch or millimetres?
Regards,
Terry
This is very interesting as Microwave ovens have now joined the throw-away
not worth repairing because a new one is so cheap.
| Most transformers give you 1 volt per winding on the secondary.
| Use big wire, #12 household wire works good. You have lots of room.
What is this #12 household wire. We have a different standard here and wire
is measure in millimetres. Could you give a micrometer measure in thousands
of an inch or millimetres?
Regards,
Terry
Discussion Thread
Walter
2002-02-11 08:15:11 UTC
Big, Cheap Power for Steppers
Smoke
2002-02-11 08:51:58 UTC
Re: [CAD_CAM_EDM_DRO] Big, Cheap Power for Steppers
James Owens
2002-02-11 16:38:56 UTC
Re: [CAD_CAM_EDM_DRO] Big, Cheap Power for Steppers
William Scalione
2002-02-11 17:10:33 UTC
Re: [CAD_CAM_EDM_DRO] Big, Cheap Power for Steppers
JanRwl@A...
2002-02-11 17:54:15 UTC
Re: [CAD_CAM_EDM_DRO] Big, Cheap Power for Steppers
Raymond Heckert
2002-02-11 20:35:57 UTC
Re: [CAD_CAM_EDM_DRO] Big, Cheap Power for Steppers
Chris L
2002-02-11 22:45:18 UTC
Re: [CAD_CAM_EDM_DRO] Big, Cheap Power for Steppers
ericgraham
2002-02-12 12:47:26 UTC
Re: Big, Cheap Power for Steppers
JanRwl@A...
2002-02-12 13:59:22 UTC
Re: [CAD_CAM_EDM_DRO] Re: Big, Cheap Power for Steppers
ccs@m...
2002-02-12 14:20:48 UTC
Re: [CAD_CAM_EDM_DRO] Re: Big, Cheap Power for Steppers
JanRwl@A...
2002-02-12 14:36:41 UTC
Re: [CAD_CAM_EDM_DRO] Re: Big, Cheap Power for Steppers
James Owens
2002-02-12 14:53:30 UTC
Re: [CAD_CAM_EDM_DRO] Big, Cheap Power for Steppers
Raymond Heckert
2002-02-12 21:49:05 UTC
Re: [CAD_CAM_EDM_DRO] Big, Cheap Power for Steppers
JanRwl@A...
2002-02-13 19:09:52 UTC
Re: [CAD_CAM_EDM_DRO] Big, Cheap Power for Steppers
Hugh Prescott
2002-02-14 09:41:39 UTC
Re: [CAD_CAM_EDM_DRO] Big, Cheap Power for Steppers
studleylee
2002-02-14 09:59:45 UTC
Re: Big, Cheap Power for Steppers
JanRwl@A...
2002-02-14 19:35:30 UTC
Re: [CAD_CAM_EDM_DRO] Re: Big, Cheap Power for Steppers