CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Big, Cheap Power for Steppers

on 2002-02-11 17:10:33 UTC
Here's a chart

http://www.tpub.com/neets/book4/11c.htm

Bill

> Hi,
>
> This is very interesting as Microwave ovens have now joined the throw-away
> not worth repairing because a new one is so cheap.
>
> | Most transformers give you 1 volt per winding on the secondary.
> | Use big wire, #12 household wire works good. You have lots of room.
>
> What is this #12 household wire. We have a different standard here and
wire
> is measure in millimetres. Could you give a micrometer measure in
thousands
> of an inch or millimetres?
>
> Regards,
>
> Terry

Discussion Thread

Walter 2002-02-11 08:15:11 UTC Big, Cheap Power for Steppers Smoke 2002-02-11 08:51:58 UTC Re: [CAD_CAM_EDM_DRO] Big, Cheap Power for Steppers James Owens 2002-02-11 16:38:56 UTC Re: [CAD_CAM_EDM_DRO] Big, Cheap Power for Steppers William Scalione 2002-02-11 17:10:33 UTC Re: [CAD_CAM_EDM_DRO] Big, Cheap Power for Steppers JanRwl@A... 2002-02-11 17:54:15 UTC Re: [CAD_CAM_EDM_DRO] Big, Cheap Power for Steppers Raymond Heckert 2002-02-11 20:35:57 UTC Re: [CAD_CAM_EDM_DRO] Big, Cheap Power for Steppers Chris L 2002-02-11 22:45:18 UTC Re: [CAD_CAM_EDM_DRO] Big, Cheap Power for Steppers ericgraham 2002-02-12 12:47:26 UTC Re: Big, Cheap Power for Steppers JanRwl@A... 2002-02-12 13:59:22 UTC Re: [CAD_CAM_EDM_DRO] Re: Big, Cheap Power for Steppers ccs@m... 2002-02-12 14:20:48 UTC Re: [CAD_CAM_EDM_DRO] Re: Big, Cheap Power for Steppers JanRwl@A... 2002-02-12 14:36:41 UTC Re: [CAD_CAM_EDM_DRO] Re: Big, Cheap Power for Steppers James Owens 2002-02-12 14:53:30 UTC Re: [CAD_CAM_EDM_DRO] Big, Cheap Power for Steppers Raymond Heckert 2002-02-12 21:49:05 UTC Re: [CAD_CAM_EDM_DRO] Big, Cheap Power for Steppers JanRwl@A... 2002-02-13 19:09:52 UTC Re: [CAD_CAM_EDM_DRO] Big, Cheap Power for Steppers Hugh Prescott 2002-02-14 09:41:39 UTC Re: [CAD_CAM_EDM_DRO] Big, Cheap Power for Steppers studleylee 2002-02-14 09:59:45 UTC Re: Big, Cheap Power for Steppers JanRwl@A... 2002-02-14 19:35:30 UTC Re: [CAD_CAM_EDM_DRO] Re: Big, Cheap Power for Steppers