Re: [CAD_CAM_EDM_DRO] Re: troubleshooting help

> FKEYBIT LPT1 (or LPT2 or LPTM)
>
> I can't take credit for writing it though. Terry King built this
> to solve exactly the same problem you're working on. You should be
> able to get something to move with his program. Be sure to hit "P"
> to see the pin numbers displayed onscreen.

I ran the FKEYBIT program, and put my voltmeter across pin 3 (which I
activated in the program) and pin 25 (ground). It read 4.8 volts, but I
still couldn't get the motors to move. Looks like I screwed up the wiring
somewhere.

When I put the voltmeter across pin 3 and the 5V ground in the control box
power supply, it read 8V!

Should I have the parallel port ground pins (18-25) connected to anything on
the Gecko drivers?

Rick