Re: Who's got what running?
Posted by
stvracer90
on 2002-02-20 02:57:01 UTC
Hi John
I an using a built from scratch 48" x 48" gantry router table using
servos and a lm3629 servo card with proprietary dos G-code converter
software. Also I am using a Series II Bridgeport that I converted to
PC control with servos using Gecko 340s and a VFD for the spindle,
running EMC.
Steve
--- In CAD_CAM_EDM_DRO@y..., "stevenson_engineers" <machines@n...>
wrote:
I an using a built from scratch 48" x 48" gantry router table using
servos and a lm3629 servo card with proprietary dos G-code converter
software. Also I am using a Series II Bridgeport that I converted to
PC control with servos using Gecko 340s and a VFD for the spindle,
running EMC.
Steve
--- In CAD_CAM_EDM_DRO@y..., "stevenson_engineers" <machines@n...>
wrote:
> Well the list has been going for quite a while now and there hasbeen
> some very good advise and help from a lot of people on this list onto
> all subjects related to CNC and also workshop topics.
> Prompted by the samll video the other day [ very good BTY ] I have
> ask this question.a
> Who has actually got anything running either as a conversion kit or
> built it yourself project. ??
> List of stuff in boxes doesn't count.
> OK all dive in.
> Bill as list Mom do you want to kick this off?
>
> John S.
Discussion Thread
stevenson_engineers
2002-02-20 01:38:21 UTC
Who's got what running?
stvracer90
2002-02-20 02:57:01 UTC
Re: Who's got what running?
Bob Bachman
2002-02-20 05:24:34 UTC
[CAD_CAM_EDM_DRO] VFD Help
andesign2
2002-02-20 06:29:29 UTC
Re: Who's got what running?
Mark Fraser
2002-02-20 09:15:28 UTC
Who's got what running?
wanliker@a...
2002-02-20 10:19:33 UTC
Re: [CAD_CAM_EDM_DRO] Who's got what running?
glee@i...
2002-02-20 10:42:18 UTC
Re: [CAD_CAM_EDM_DRO] Who's got what running?
Chris Clough
2002-02-20 10:45:12 UTC
RE: [CAD_CAM_EDM_DRO] Who's got what running?
Les Watts
2002-02-20 12:03:26 UTC
Re: [CAD_CAM_EDM_DRO] Who's got what running?
Carol & Jerry Jankura
2002-02-20 12:15:29 UTC
RE: [CAD_CAM_EDM_DRO] Who's got what running?
j.guenther
2002-02-20 12:21:35 UTC
RE: [CAD_CAM_EDM_DRO] Who's got what running?
Paul Amaranth
2002-02-20 12:30:09 UTC
Re: [CAD_CAM_EDM_DRO] Who's got what running?
Alan Marconett KM6VV
2002-02-20 12:38:05 UTC
Re: Who's got what running?
Kevin P. Martin
2002-02-20 12:38:31 UTC
RE: [CAD_CAM_EDM_DRO] Who's got what running?
rainnea
2002-02-20 15:17:13 UTC
Re: Who's got what running?
jlm_1951
2002-02-20 15:48:01 UTC
Re: Who's got what running?
allan_reinhard
2002-02-20 16:39:39 UTC
Re: Who's got what running?
Neil Gillies
2002-02-21 12:40:32 UTC
Digital Knobs - a solution?
Jon Elson
2002-02-21 22:14:17 UTC
Re: [CAD_CAM_EDM_DRO] Who's got what running?
Keith Rumley
2002-02-22 05:52:51 UTC
Re: [CAD_CAM_EDM_DRO] Who's got what running?