Re: [CAD_CAM_EDM_DRO] Re: Re: Limit and Homing switches

>
> At 09:02 AM 3/8/2002 -0600, Ray wrote:
>
> >The moving vane has the advantage of not tripping a mechanical switch on
> >each revolution of the screw or motor like a cam would.
>
> The mental image I got from the original description was that the
> microswitch was on the carriage/table itself, and that the cam only
> actuated it when the carriage came adjacent to the cam on the last
> leadscrew rotation.
>
> Best regards,
>
> Randy
>
> Randy Gordon-Gilmore ,----.___________ ______________ _________________
> ProtoTrains // = = === == || == == == = || == == == = == =|
> Rio Vista, CA, USA /-O==O------------o==o------------o==o-----------o==o-'
> zephyrus@... http://www.rickadee.net/~zephyrus
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> http://www.metalworking.com/news_servers.html
> http://www.metalworking.com/news_servers.html
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/