Creating long straight edges

----- Original Message -----
From: "John Craddock" <John.Craddock@...>

> Les
> I and some others must have missed your description of the long surface
> scraping method. Would appreciate if you could describe it again, possibly
> in a separate thread.
> Thanks
> John C

Ok I have at least a draft of the write up on the method. It is four pages
so I just ftp'd it
on to a new web page on my site rather than post it here. It is a bit rough
with no pictures
but perhaps enough to get the concept at least. It is at:

http://www.rabun.net/~leswatts/shop.html

at the bottom.

Les

Leslie Watts
L M Watts Furniture
Tiger, Georgia USA
http://www.rabun.net/~leswatts/wattsfurniturewp.html
engineering page:
http://www.rabun.net/~leswatts/shop.html