RE: [CAD_CAM_EDM_DRO] Creating long straight edges

Hi Les -

Nice write-up. Thanks.

I'm looking forward to your next installment on matching the
second mounting surface. Could you also offer some tips on
squaring up perpendicular axes with basic equipment?

Thanks,

Carlos Guillermo
VERVE Engineering & Design

-----Original Message-----
From: Les Watts [mailto:leswatts@...]
Sent: Tuesday, July 02, 2002 3:14 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Creating long straight edges

----- Original Message -----
From: "John Craddock" <John.Craddock@...>

> Les
> I and some others must have missed your description of the long
surface
> scraping method. Would appreciate if you could describe it
again, possibly
> in a separate thread.
> Thanks
> John C

Ok I have at least a draft of the write up on the method. It is
four pages
so I just ftp'd it
on to a new web page on my site rather than post it here. It is a
bit rough
with no pictures
but perhaps enough to get the concept at least. It is at:

http://www.rabun.net/~leswatts/shop.html

at the bottom.

Les

Leslie Watts
L M Watts Furniture
Tiger, Georgia USA
http://www.rabun.net/~leswatts/wattsfurniturewp.html
engineering page:
http://www.rabun.net/~leswatts/shop.html


Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to
reach it if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this as
a sister site to the CCED group, as many of the same members are
there, for OT subjects, that are not allowed on the CCED list.



Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
wanliker@...
Moderator: jmelson@... timg@...
[Moderator]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Mom
List Owner



Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/