RE: [CAD_CAM_EDM_DRO] Creating long straight edges

Les,
Can't raise any of your pages at the moment. You might like to check on your
site. I have checked other pages in the U.S., and it is not this end that is
the problem.
Regard
John C


-----Original Message-----
From: Les Watts [mailto:leswatts@...]
Sent: Wednesday, 3 July 2002 5:14 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Creating long straight edges

----- Original Message -----
From: "John Craddock" <John.Craddock@...>

> Les
> I and some others must have missed your description of the long surface
> scraping method. Would appreciate if you could describe it again, possibly
> in a separate thread.
> Thanks
> John C

Ok I have at least a draft of the write up on the method. It is four pages
so I just ftp'd it
on to a new web page on my site rather than post it here. It is a bit rough
with no pictures
but perhaps enough to get the concept at least. It is at:

http://www.rabun.net/~leswatts/shop.html

at the bottom.

Les

Leslie Watts
L M Watts Furniture
Tiger, Georgia USA
http://www.rabun.net/~leswatts/wattsfurniturewp.html
engineering page:
http://www.rabun.net/~leswatts/shop.html


Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this as a sister
site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.



Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Mom
List Owner



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/