CAD CAM EDM DRO - Yahoo Group Archive

Re: Flat surface creation revisted (concrete)

on 2002-07-11 17:41:09 UTC
> I had considered a concrete base
> for my router table. As the
> design grew to ten feet long
> I decided this was going to be too heavy.

> My router table ... has a 3/4" steel
> plate for the top. I'm estimating
> about 4000 pounds total machine weight.


Ok, now we get a feel for what you considder too heavy.


Thanks for the good info on shrinkage.
seems Jerry Seinfield didn't cover all
the bases. : )

I gave the idea of a 2-4 inch thick concrete bench with 2" square
holes all over, with 2" bridges. it seems it would cut down on the
overall wieght, still leave support and also holes for the vacum
system.


Dave



> The inverted rails are easily shielded from dust and swarf. Hiwin
rates
> their rails the same for all positions.
>
> Doug

Discussion Thread

Les Watts 2002-07-02 12:07:04 UTC Creating long straight edges Carlos Guillermo 2002-07-02 12:34:51 UTC RE: [CAD_CAM_EDM_DRO] Creating long straight edges John Craddock 2002-07-02 21:09:59 UTC RE: [CAD_CAM_EDM_DRO] Creating long straight edges Les Watts 2002-07-03 05:20:47 UTC Re: [CAD_CAM_EDM_DRO] Creating long straight edges Country Bubba 2002-07-03 15:33:10 UTC Re: [CAD_CAM_EDM_DRO] Creating long straight edges Doug Harrison 2002-07-06 21:26:48 UTC Re: [CAD_CAM_EDM_DRO] Re: Creating long straight edges Doug Harrison 2002-07-06 21:43:53 UTC Re: [CAD_CAM_EDM_DRO] Re: Creating long straight edges cnc_4_me 2002-07-06 22:42:45 UTC Re: Creating long straight edges Ian W. Wright 2002-07-07 00:48:23 UTC Re: [CAD_CAM_EDM_DRO] Re: Creating long straight edges Les Watts 2002-07-07 04:56:16 UTC Re: [CAD_CAM_EDM_DRO] Re: Creating long straight edges turbulatordude 2002-07-07 05:48:12 UTC Re: Creating long straight edges Les Watts 2002-07-07 07:21:50 UTC Re: [CAD_CAM_EDM_DRO] Re: Creating long straight edges Jon Elson 2002-07-07 09:44:21 UTC Re: [CAD_CAM_EDM_DRO] Re: Creating long straight edges Jon Elson 2002-07-07 09:48:51 UTC Re: [CAD_CAM_EDM_DRO] Re: Creating long straight edges drking777 2002-07-08 07:15:26 UTC Re: Creating long straight edges Les Watts 2002-07-08 08:48:43 UTC Re: [CAD_CAM_EDM_DRO] Re: Creating long straight edges drking777 2002-07-10 20:53:50 UTC Flat surface creation revisted Jon Elson 2002-07-10 22:39:19 UTC Re: [CAD_CAM_EDM_DRO] Flat surface creation revisted turbulatordude 2002-07-11 06:21:48 UTC Re: Flat surface creation revisted Doug Harrison 2002-07-11 13:22:54 UTC Re: [CAD_CAM_EDM_DRO] Flat surface creation revisted drking777 2002-07-11 14:07:27 UTC Re: Flat surface creation revisted drking777 2002-07-11 14:21:53 UTC Re: Flat surface creation revisted Doug Harrison 2002-07-11 16:19:28 UTC Re: [CAD_CAM_EDM_DRO] Re: Flat surface creation revisted turbulatordude 2002-07-11 17:41:09 UTC Re: Flat surface creation revisted (concrete)