acceleration profille
Posted by
keongsan
on 2002-07-26 02:01:35 UTC
Hi,
Having some problem with the z-axis in the cnc'ed sherline with
Sherline stepper 1/2 winding, Camtronics 2A driver, desknc black box,
with the parameters set up as follows
Acceleration=5000
maxsps=15000
start_vel=5000
steps/mm=400
The z-axis seem to be loosing steps very badly. The z-axis seem to
jerk, and hardly move. I set the accel. to 500 and start vel. to 500
and problem persist. I think it may be the parameters may not be
suitable for this configuration.
Can someone suggest a suitable parameter for this set-up or let us
know about the parameters which is working with your system.
Thanks in advance
keongsan
Having some problem with the z-axis in the cnc'ed sherline with
Sherline stepper 1/2 winding, Camtronics 2A driver, desknc black box,
with the parameters set up as follows
Acceleration=5000
maxsps=15000
start_vel=5000
steps/mm=400
The z-axis seem to be loosing steps very badly. The z-axis seem to
jerk, and hardly move. I set the accel. to 500 and start vel. to 500
and problem persist. I think it may be the parameters may not be
suitable for this configuration.
Can someone suggest a suitable parameter for this set-up or let us
know about the parameters which is working with your system.
Thanks in advance
keongsan
Discussion Thread
keongsan
2002-07-26 02:01:35 UTC
acceleration profille
Dan Mauch
2002-07-26 11:19:31 UTC
RE: [CAD_CAM_EDM_DRO] acceleration profille
Dave Hylands
2002-07-26 11:31:42 UTC
RE: [CAD_CAM_EDM_DRO] acceleration profille
cadcambee
2002-07-26 17:21:48 UTC
Re: acceleration profille
keongsan
2002-07-27 05:04:39 UTC
Re: acceleration profille (gained steps?)
jmkasunich
2002-07-27 12:26:06 UTC
Re: acceleration profille
Graham Hollis
2002-07-27 15:05:11 UTC
Re: [CAD_CAM_EDM_DRO] Re: acceleration profille
Michael Holm
2002-07-27 16:49:00 UTC
Re: [CAD_CAM_EDM_DRO] acceleration profille
jmkasunich
2002-07-27 17:02:37 UTC
Re: acceleration profille
Alan Marconett KM6VV
2002-07-27 17:30:05 UTC
Re: [CAD_CAM_EDM_DRO] acceleration profille
cadcambee
2002-07-27 18:08:52 UTC
Re: acceleration profille
mariss92705
2002-07-27 19:52:51 UTC
Re: acceleration profille
Alan Marconett KM6VV
2002-07-28 11:26:47 UTC
Re: acceleration profille
keongsan
2002-07-28 16:57:15 UTC
Re: acceleration profille (gained steps?)
keongsan
2002-07-28 17:01:16 UTC
Re: acceleration profille (gained steps?)
Steve Blackmore
2002-07-28 17:34:56 UTC
Re: [CAD_CAM_EDM_DRO] Re: acceleration profille
Dave Hylands
2002-07-28 18:00:37 UTC
RE: [CAD_CAM_EDM_DRO] Re: acceleration profille (gained steps?)
mariss92705
2002-07-28 18:20:29 UTC
Re: acceleration profille (gained steps?)
Alan Marconett KM6VV
2002-07-28 19:57:30 UTC
Re: acceleration profille
MIKEC@W...
2002-07-28 21:41:19 UTC
Re: [CAD_CAM_EDM_DRO] Re: acceleration profille
MIKEC@W...
2002-07-28 21:44:17 UTC
Re: [CAD_CAM_EDM_DRO] acceleration profille
chapmani
2002-07-29 02:11:59 UTC
Re: acceleration profille
eforum3001
2002-07-29 04:04:01 UTC
Re: acceleration profille (gained steps?)