CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] Reed switch for limits - anyone done it?

Posted by Peter Homann
on 2002-08-14 22:46:54 UTC
Hi,

They may work as Limits, but probably won't be accurate enough for home
switches.

Also will the magnets end up as swarf balls?

Cheers,

Peter Homann
mailto:Peter.Homann@...
Adacel Technologies Limited,
250 Bay St, BRIGHTON, 3186, AUSTRALIA
http://www.adacel.com <http://www.adacel.com>
Telephone +61 (3) 8530 7777, Facsimile +61 (3) 9596 2960
Mobile 0421-601 665


-----Original Message-----
From: mszollar [mailto:kenargo@...]
Sent: Thursday, 15 August 2002 3:27 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Reed switch for limits - anyone done it?


I was considering using small magnets and micro reed switches
mounted into the base of my Sherline mill to be used for limit and
home switches. I figured that mounting magnets into the underside
of the table and the switch in the mated surface would be a good
solution; nothing exposed, nothing to break is overtravel happens
and fast switches.

Before I drill and mount I thought it a good idea to check the group
and see if anyone else has gone this route and what they thought of
the idea (good or bad).

Thanks,
Ken



Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this as a sister
site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........

Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Mom
List Owner



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Discussion Thread

mszollar 2002-08-14 22:26:35 UTC Reed switch for limits - anyone done it? Peter Homann 2002-08-14 22:46:54 UTC RE: [CAD_CAM_EDM_DRO] Reed switch for limits - anyone done it? Ian W. Wright 2002-08-15 00:48:47 UTC Re: [CAD_CAM_EDM_DRO] Reed switch for limits - anyone done it? JJ 2002-08-15 05:45:03 UTC RE: [CAD_CAM_EDM_DRO] Reed switch for limits - anyone done it? Carol & Jerry Jankura 2002-08-15 06:09:43 UTC RE: [CAD_CAM_EDM_DRO] Reed switch for limits - anyone done it? JanRwl@A... 2002-08-15 07:59:48 UTC Re: [CAD_CAM_EDM_DRO] Reed switch for limits - anyone done it? Alan Marconett KM6VV 2002-08-15 10:27:42 UTC Re: [CAD_CAM_EDM_DRO] Reed switch for limits - anyone done it? Matt Shaver 2002-08-15 18:26:37 UTC Re: [CAD_CAM_EDM_DRO] Reed switch for limits - anyone done it? Alan Marconett KM6VV 2002-08-15 18:36:50 UTC Re: [CAD_CAM_EDM_DRO] Reed switch for limits - anyone done it? Carol & Jerry Jankura 2002-08-15 20:54:59 UTC RE: [CAD_CAM_EDM_DRO] Reed switch for limits - anyone done it? Matt Shaver 2002-08-15 21:20:18 UTC Re: [CAD_CAM_EDM_DRO] Reed switch for limits - anyone done it? Alan Marconett KM6VV 2002-08-16 09:44:39 UTC Re: [CAD_CAM_EDM_DRO] Reed switch for limits - anyone done it? Jon Elson 2002-08-16 10:18:18 UTC Re: [CAD_CAM_EDM_DRO] Reed switch for limits - anyone done it? Alan Marconett KM6VV 2002-08-16 12:51:13 UTC Re: [CAD_CAM_EDM_DRO] Reed switch for limits - anyone done it? Dave Engvall 2002-08-17 08:16:15 UTC Re: [CAD_CAM_EDM_DRO] Reed switch for limits - anyone done it? Jon Anderson 2002-08-17 08:41:25 UTC Re: [CAD_CAM_EDM_DRO] Reed switch for limits - anyone done it? mszollar 2002-08-17 12:44:52 UTC Re: Reed switch for limits - anyone done it? Bill Vance 2002-08-17 15:44:29 UTC Re: [CAD_CAM_EDM_DRO] Re: Reed switch for limits - anyone done it? turbulatordude 2002-08-17 20:10:00 UTC Re: Reed switch for limits - anyone done it?