CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Reed switch for limits - anyone done it?

on 2002-08-15 18:36:50 UTC
Hi Matt,

How much info can you supply? a pix of brackets and switches you used,
and a text description of where each goes (i.e., "left end of X bed...")
would help! Or even a drawing (DXF, JPG, etc) of the brackets. If you
are using std. micro switches, we can probably figure out which switch
is used. Give us some hints!

Alan KM6VV
P.S. Want to sell a set of brackets?


Matt Shaver wrote:
>
> On Thursday 15 August 2002 01:30 pm, you wrote:
>
> > I've thought about mounting micro-micro switches on my
> > Sherline mill, but haven't quite figured out where. You may be on to
> > something there. I'd hate to do a lot of "carving" on the mill's bed,
> > 'tho. The other thought I had was to mount photo-interrupter type
> > switches.
>
> I built a Sherline 5400 mill with individual plus limit, minus limit and home
> switches on all three axes for NIST. Before I delivered it I took it to NAMES
> this past April. I never took any pictures though :(... I'm going to build at
> least one more, maybe two but I have four more sets of brackets (black
> anodised aluminum to match the mill!). Did anyone who went to NAMES get a
> picture of this?
>
> Matt

Discussion Thread

mszollar 2002-08-14 22:26:35 UTC Reed switch for limits - anyone done it? Peter Homann 2002-08-14 22:46:54 UTC RE: [CAD_CAM_EDM_DRO] Reed switch for limits - anyone done it? Ian W. Wright 2002-08-15 00:48:47 UTC Re: [CAD_CAM_EDM_DRO] Reed switch for limits - anyone done it? JJ 2002-08-15 05:45:03 UTC RE: [CAD_CAM_EDM_DRO] Reed switch for limits - anyone done it? Carol & Jerry Jankura 2002-08-15 06:09:43 UTC RE: [CAD_CAM_EDM_DRO] Reed switch for limits - anyone done it? JanRwl@A... 2002-08-15 07:59:48 UTC Re: [CAD_CAM_EDM_DRO] Reed switch for limits - anyone done it? Alan Marconett KM6VV 2002-08-15 10:27:42 UTC Re: [CAD_CAM_EDM_DRO] Reed switch for limits - anyone done it? Matt Shaver 2002-08-15 18:26:37 UTC Re: [CAD_CAM_EDM_DRO] Reed switch for limits - anyone done it? Alan Marconett KM6VV 2002-08-15 18:36:50 UTC Re: [CAD_CAM_EDM_DRO] Reed switch for limits - anyone done it? Carol & Jerry Jankura 2002-08-15 20:54:59 UTC RE: [CAD_CAM_EDM_DRO] Reed switch for limits - anyone done it? Matt Shaver 2002-08-15 21:20:18 UTC Re: [CAD_CAM_EDM_DRO] Reed switch for limits - anyone done it? Alan Marconett KM6VV 2002-08-16 09:44:39 UTC Re: [CAD_CAM_EDM_DRO] Reed switch for limits - anyone done it? Jon Elson 2002-08-16 10:18:18 UTC Re: [CAD_CAM_EDM_DRO] Reed switch for limits - anyone done it? Alan Marconett KM6VV 2002-08-16 12:51:13 UTC Re: [CAD_CAM_EDM_DRO] Reed switch for limits - anyone done it? Dave Engvall 2002-08-17 08:16:15 UTC Re: [CAD_CAM_EDM_DRO] Reed switch for limits - anyone done it? Jon Anderson 2002-08-17 08:41:25 UTC Re: [CAD_CAM_EDM_DRO] Reed switch for limits - anyone done it? mszollar 2002-08-17 12:44:52 UTC Re: Reed switch for limits - anyone done it? Bill Vance 2002-08-17 15:44:29 UTC Re: [CAD_CAM_EDM_DRO] Re: Reed switch for limits - anyone done it? turbulatordude 2002-08-17 20:10:00 UTC Re: Reed switch for limits - anyone done it?